PCI Cards

PCI Board/Universal/Analog/4AO/14bit/Isol.The PISO-DA series adds high-voltage isolation design that offers a durable ability to keep users' computers safe from unexpected surge. It is the built-in high-quality isolation components that make PISO-DA series featuring 2500 VDC bus-typed isolation!For the PISO-DA series, their voltage output range is from -10 V to +10 V, and their current output range is from 0 to 20 mA. In addition, These cards also feature the following advantages by ICP DAS's innovation:  Accurate and easy-to-use calibration. ICP DAS provides the software calibration instead of the manual calibration so that no jumpers and trim-pots are required anymore. The calibration information can be saved in EEPROM for long-term use. Individual channel configuration.In other words, every channel can be individually configured as voltage output or current output! ICP DAS provides the Card ID function. Users can set card ID for each card and then recognize them one by one when more than two boards are used in a computer.The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications. Accessories

PCI Board/Universal/Digital/16DI/16RO/PhotoMosThe PCI-P16POR16U Universal PCI card supports both 5 V and 3.3 V. These cards provide 8 or 16 optically isolated input channels and 16 PhotoMOS Relay output channels. Both the isolated DI channels and the PhotoMOS Relay channels use a short optical transmission path to transfer an electronic signal between elements of a circuit and keep them electrically isolated. The PCI-P16POR16U card provides 5000 Vrms for DI channel isolation protection, allowing the input signals to be completely floated so as to cut down ground loops, block voltage spikes, and isolate the host computer from damaging voltages. PhotoMOS Relays are used where it is necessary to control a circuit using a low-power signal (with complete electrical isolation between the control and controlled circuits), or where several circuits must be controlled by one signal. These cards can be used in various applications, such as controlling the ON/OFF state of external devices, driving external relays or small power switches, activating alarms, contact closure, sensing external voltages or switches, etc.The PCI-P16POR16U card also adds a Card ID switch on-board. Users can set Card ID and then recognizes the board by the ID via software when using two or more cards in one computer.The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications. Accessories

PCI Board/Universal/32 ch./12bit/110ks/s/8KThe PCI-1202LU is a family of high performance data acquisition board. They feature a continuous A/D acquisition function of up to 110 kHz for low gain under DOS and offer two 12-bit D/A output channels, 16 digital input channels and 16 digital output channels. The PCI-1202LU provides 32-channel single-ended or 16-channel differential analog inputs. The PCI-1202LU features " MagicScan" function and Continuous Capture function.The PCI-1202LU Universal PCI card supports both 5 V and 3.3 V. These cards add new designs of Card ID switch with which users can recognize the board by the ID via software when using two or more PCI-1202LU cards in one computer. The pull-high/low jumpers of the card allow user to predefine the DI status instead of floating when the DI channels are unconnected or broken.The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications.

PCI Board/Universal/Digital/8DI/8RelaisThe PISO-725U universal PCI card supports 3.3 V/5 V PCI bus. These cards contain 8 electromechanical Relay Output channels and 8 isolated or non-isolated Digital Input channels. The DI channels can be set to either isolated or non-isolated via a hardware jumper, and each channel will generate an interrupt signal if the state is changed, which is very useful when monitoring for contact closures/openings as it is not necessary to continuously poll the inputs. The isolated DI channels use a short optical transmission path to transfer an electronic signal between elements of a circuit and keep them electrically isolated. With 3750 Vrms isolation protection, the DI channels allow the input signals to be completely floated so as to prevent ground loops and isolate the host computer from damaging voltages. The Relay Output channels are used where it is necessary to control a circuit using a low-power signal, with complete electrical isolation between the control and controlled circuits, or where several circuits must be controlled by one signal. All relays are de-energized (switched off) during power-on, and support ON/OFF status read back. The PISO-725U can be used in a variety of applications, including contact closure, external voltage sensing, load sensing and I/O control, etc.The PISO-725U also adds a Card ID switch on-board. Users can set Card ID and then recognizes the board by the ID via software when using two or more cards in one computer.The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications. Accessories

PCI Board/Universal/Digital/24DI/O/OPTO-22The PIO-D24U supports 3.3 V/5 V PCI bus. The PIO-D24U consists of three 8-bit bi-direction ports. The 8-bit ports are named as port A (PA), port B (PB) and port C (PC) respectively. All ports are configured as inputs upon power-up or reset.The PIO-D24U has a Card ID switch with which users can recognize the board by the ID via software when using two or more PIO-D24U cards in one computer.The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland c++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications. Accessories

PCI Board/Universal/Analog/16AO/14bit/DN-37For the PIO-DA series, their voltage output range is from -10 V to +10 V, and their current output range is from 0 to 20 mA. In addition, These cards also feature the following advantages by ICP DAS's innovation: Accurate and easy-to-use calibration. ICP DAS provides the software calibration instead of the manual calibration so that no jumpers and trim-pots are required anymore.The calibration information can be saved in EEPROM for long-term use. Individual channel configuration.In other words, every channel can be individually configured as voltage output or current output! ICP DAS provides the Card ID function. Users can set card ID for each card and then recognize them one by one when more than two boards are used in a computer.The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications. Accessories

PCI Board/Universal/32 ch./12bit/44ks/s/DB-1825The PCI-1802HU card has a universal PCI interface supporting both 3.3 V and 5 V PCI bus. All the members in the PCI-1800 family have the same architecture; they feature a continuous A/D acquisition function of up to 44 kHz for high gain under DOS and offer two 12-bit D/A output channels, 16 digital input channels and 16 digital output channels. The PCI-1802 series provides 32 single-ended or 16 differential inputs. In addition, an amazing A/D channel scan function called “MagicScan” is provided for users to easily implement multi-channel analog data acquisition applications. The specific MagicScan controller takes out most works of getting A/D value such as selecting channel, setting gain, settling time, triggering ADC and getting data. Even in channel scan mode, it can have different gain code for each channel, and the sampling rate can still reach 44 kS/s totally.The PCI-1802 series cards are equipped with 8 K samples hardware FIFO to reduce data overflow issues under multi-tasking environment like Windows and Linux.The PCI-1802HU has a Card ID switch with which users can recognize the board by the ID via software when using two or more PCI-1802HU cards in one computer. The pull-high/low jumpers of the card allow user to predefine the DI status instead of floating when the DI channels are unconnected or broken.The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications.  ICP DAS PC-Based Multifunction Board Selection Guide Model Name D/A Channel A/D Channel A/D Sampling Rate FIFO ize Software Trigger (Polling) Pacer Scan (Magicscan) Post-trigger Pre-trigger Middle-trigger Interrupt function   PCI-1202LU 12-bit, 2-ch 12-bit, 32 S.E/16 Diff 110 kS./s 1 k V V V -   PCI-1202HU 12-bit, 2-ch 12-bit, 32 S.E/16 Diff 44 kS./s 1 k V V V -   PCI-1602U 12-bit, 2-ch 16-bit, 32 S.E/16 Diff 100 kS./s 8 k V V V -   PCI-1602FU 12-bit, 2-ch 16-bit, 32 S.E/16 Diff 200 kS./s 8 k V V V --   PCI-1800LU 12-bit, 2-ch 12-bit, 16 S.E/8 Diff 330 kS./s 1 k V V V -   PCI-1800HU 12-bit, 2-ch 12-bit, 16 S.E/8 Diff 44 kS./s 1 k V V V -   PCI-1802LU 12-bit, 2-ch 12-bit, 32 S.E/16 Diff 330 kS./s 8 k V V V -   PCI-1802HU 12-bit, 2-ch 12-bit, 32 S.E/16 Diff 44 kS./s 8 k V V V -   PCI-822LU 16-bit, 2-ch 12-bit, 32 S.E/16 Diff 250 kS./s 8 k V V V V Cost-effective Programmable DIO PCI-826LU 16-bit, 2-ch 16-bit, 32 S.E/16 Diff 250 kS./s 8 k V V V V Cost-effective Programmable DIO   Accessories

PCI Board/Universal/Digital/16DI/16RO/isol.The PISO-P16R16U is a universal PCI card supporting both the 5 V and 3.3 V PCI bus. Each contain 16 photo coupler digital inputs that provide 3750 Vrms isolation protection, allowing the input signals to be completely floated so as to prevent ground loops. They are also equipped with 16 relay output channels to enable the control of the ON/OFF state of external devices, drive external relays or small power switches, or activate alarms, etc.The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications. Comparsion Model Name PCI-P16R16U PISO-P16R16U PEX-P16R16i PEX-P8R8i Bus Universal PCI Universal PCI PCI Express x1 Relays Form C x 8 Form A x 8 Form C x 4 Form A x 4 Digital Input 16-ch with 5000 Vrms Isolation 16-ch with 3750 Vrms Isolation 8-ch with 3750 Vrms Isolation Card ID - Yes (4-bit) Data bus 16-bit 8-bit Driver UniDAQ SDK/Driver, or PCI-P16R16 SDK/Driver UniDAQ SDK/Driver, or PISO-DIO SDK/Driver Remarks - Suggested for new users.   Accessories

PCI Board/Universal/Digital/32DI/32DO/isol.PISO-P32S32WU has 32 channels of optical-isolated DI and 32 channels of optical-isolated open-collector output board (8-channel for 500 mA and 24-channel for 100 mA current sinking output, NPN), arranged into four isolated banks. Each input channel use a photo-coupler to isolate the card and computer from external signal. Each digital output offers a NPN transistor and integral suppression diode for inductive load. PISO-P32S32WU requires external power to drive the D/I and D/O ports and supports Card ID (jumper) features for multi-board identification and supports both 5 V and 3.3 V PCI slot.This interface board is easily installed in any PC. The board interface to field logic signals, eliminating ground-loop problems and isolating the host computer from damaging voltages. PISO-P32S32WU has one 37-pin D-Sub connector and one 40-pin male header. The 40-pin to DB-37 flat cable is used to fix with the case. The user can connect the digital signal through the second D-Sub connector. Each D-Sub connector contains 16 input channels and 16 output channels.The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications. Accessories

PCI Board/Universal/Analog/8AO/14bit/DN-37For the PIO-DA series, their voltage output range is from -10 V to +10 V, and their current output range is from 0 to 20 mA. In addition, These cards also feature the following advantages by ICP DAS's innovation: Accurate and easy-to-use calibration. ICP DAS provides the software calibration instead of the manual calibration so that no jumpers and trim-pots are required anymore.The calibration information can be saved in EEPROM for long-term use. Individual channel configuration.In other words, every channel can be individually configured as voltage output or current output! ICP DAS provides the Card ID function. Users can set card ID for each card and then recognize them one by one when more than two boards are used in a computer.The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications. Accessories

PCI Board/Universal/Digital/96DI/OThe PIO-D96U supports 3.3 V/5 V PCI bus. These cards provide 96 TTL Digital I/O lines that consist of twelve 8-bit bi-directional ports. Each group of three 8-bit ports is arranged on the connector as Port A (PA), Port B (PB) and Port C (PC), respectively, and all ports are configured as inputs ports on power-up or after a reset.The PIO-D96U provides four connectors for I/O wiring. The PIO-D96U cards include an onboard Card ID switch that enables the board to be recognized via software if two or more boards are installed in the same computer.The pull-high/low jumpers allow the DI status to be predefined instead of remaining floating if the DI channels are disconnected or interrupted.The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland c++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications.  Comparison Table Model Interface DI Pull-High/Low Compatibility Advantage PEX-D96S PCI Express Yes 5 V/CMOS Low power consumption、 Low temperature PIO-D96SU Universal PCI Yes 5 V/CMOS Low power consumption、 Low temperature PIO-D96U Universal PCI Yes 5 V/TTL High DO Driving  (Output Capability)  Accessories

PCI Board/Universal/Digital/64DO/Sinking/isol.The PISO-C64U universal PCI card supports 3.3 V/5 V PCI bus. These cards provide 64 optically isolated digital output (DO) channels, each of which includes a darlington transistor that provides 3750 Vrms isolation, and an integrated suppression diode for inductive load. These DO channels are allocated into four isolated banks when using four isolated external power supplies. These DO channels act as an interface to field logic signals, eliminate ground-loop problems, and isolate the host computer from damaging voltages. These cards contains has a single DB-37 connector and a single 40-pin male header, each of which contains 32 output channels.The PISO-C64U also adds a Card ID switch on-board. Users can set Card ID and then recognize the board by the ID via software when using two or more PIO-C64U cards in one computer.The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications. Accessories