icpdas_rollup_newsletter
icpdas_rollup_newsletter
Sign up for our newsletter!
Information on new products!
 Information on EOL articles!
Never miss product highlights again!
 Free of charge!
 Cancel with one click!
Privacy *

Rabatte_ICPDAS-EUROPE
Rabatte_ICPDAS-EUROPE
Do you already know our discounts?

And it's that simple:
➔ Register in the store
➔ Log into your account
➔ Add desired products to shopping cart

% Get individual discounts %
Register now!

ECAT-2094DS CR

€839.00*

Not on stock, usually ready for shipment in 10 days, delivery time 2-5 days

Product number: 141218
Customs number: 85176200
Country of origin: Taiwan
Weight: 0.39 kg
Product information "ECAT-2094DS CR"

Stepper Motor Controller/EtherCAT/4Axis/12DI


The ECAT-2094DS stepper motor controller is a cost-effective, two-phase bipolar stepper driver. The ECAT-2094DS simultaneously controls up to four stepper motors. A motor voltage range between 9 and 29V DC and a maximum motor coil current of 3.3A/phase is being supported. For each motor the maximum running coil current, microstep resolution and other motion parameters are software selectable.

The ECAT-2094DS is a standard EtherCAT slave and an EtherCAT master is required to operate the device. The ECAT-2094DS supports two operation modes: Free-Run and Distributed Clock (DC).

Two-phase bipolar stepper motors can be directly connected to the ECAT-2094DS device. The device is designed to operate the stepper motor in an open loop. Configuration has to be done by the EtherCAT master and the application program. Each stepper motor is being independently controlled by a separated driver IC. The four driver ICs are not synchronized and work independently from each other. The driver automatically controls the torque and position of the motor. An integrated ramp generator automatically calculates the acceleration and deceleration distance. In position mode the controller drives the motor to the target position and in velocity mode accelerates the motor to the target velocity. All motion parameters can be changed on the fly.

The ECAT-2094DS has four integrated incremental encoder interfaces. Four 32 bit high frequency encoder counter counts the input signal of external incremental encoders. The encoder can for example be used for homing purposes and for consistency checks.

High resolution of up to 256 microsteps per full step is supported for a ensuring smooth and precise motor operation.

For each motor three digital input channels are provided:A left and right hardware limit switch and a home switch.The Hardware limit switch which automatically stops the motor when activated, and all three digital inputs can be used for home position search.

The device has to supplied with three power sources. Two motor supply and a 24Vdc control supply. Two motors share one power supply.
Protocol / Communication: ETHERCAT
Digital Input: 12

0 of 0 reviews

Leave a review!

Share your experiences with other customers.