Automation Controller
For complex control tasks, ICPDAS offers various programmable automation controllers (PAC). ICPDAS' compact control solutions are equipped with powerful processors.
Our PACs support the following real-time operating systems: Windows CE, Windows Embedded Standard, Linux and MiniOS7. The automation controllers are programmed using familiar programming environments such as Visual Basic. NET, Visual C#, Visual C++. As standard software packages, Indusoft is available for Scada systems and ISaGraf for soft PLC applications.
Selection Guides:
... 16 available
USB-87P4-G CR
€223.00*
I/O chassis/DCON/USB/4slotsUSB-87P4 is an unit to expand I/O via the USB. It is designed to be used in harsh and noisy environment, so the hardware is manufactured with wide power input range (10 ~ 30 VDC), isolated power input and can operate under wide temperature (-25 ~ +75 °C). To simplify installation and maintenance of I/O modules, it provides many useful features, such as: hot swap allowed, auto configuration, LED indicators for fault detection, dual watchdog to keep alive, programmable power on and safe values for safety.There are more than 30 I/O modules supported with the unit, including analog input/output, digital input/output, counter, frequency I/O modules. We provide various software development kits (SDK) and demos, such as DLL, Labview driver, InduSoft driver, Linux driver, OPC server. The I-87K series I/O modules plugged in the USB-87Pn can be easily integrated into variant software system.
... 7 available
UC100-868M
€50.00*
IoT Controller/LoRaWAN/ModbusRTU/1xRS485
UC100 is an IoT controller used for remote control and
data acquisition from Modbus RS485 devices via LoRaWAN® networks. It can
read up to 16 Modbus RTU devices and support Modbus transparent
transmission between server and RS485 devices as a Modbus to LoRaWAN®
converter. Besides, UC100 supports multiple trigger conditions and actions
which can work autonomously even when the network dropped. Combining
with Milesight IoT Cloud solution, it can monitor and control
remote assets via web server or mobile App easily. UC100 is widely
used in indoor applications like smart metering,smart cities, building
automation, etc
... 5 available
UC300-868M
€133.00*
IoT Controller/LoRaWAN/6AI/4DI/2DO/1xRS232/1xRS485UC300 series is an IoT controller used for remote control and data
acquisition from diverse devices. It contains multiple I/O interfaces
including analog input, digital input, relay output, serial port, PT100
RTD input, which support remote device data transmission via
LoRaWAN® or 3/4G networks. Besides, UC300 series supports
multiple trigger conditions and actions which can work autonomously
even when the network dropped. Combining with Milesight IoT Cloud
solution, it can monitor and control remote devices via web server or
mobile App easily.
Adopting industrial design and IP30 metal case, UC300 is widely used
in indoor applications like smart factory, building automation, etc.
... 5 available
I-8431 CR
Controller/Intel 80188/MiniOS7/4slots/512KBThe I-8431 is an Ethernet embedded controllers with 4 I/O slots. Both are equipped with MiniOS7,an embedded OS similar to DOS that is developed by ICPDAS Co., LTD. The MiniOS7 can boot up in a very short time (0.4 ~ 0.8 second). It has built-in hardware diagnostic function, and supports the full functions to access all 8K and 87K series I/O modules, such as DI, DO, DIO, AI, AO, Counter/Frequency, motion modules etc.To simplify the TCP/IP program developing process, we designed a XServer architecture. It is a reliable, opened, expandable, all purposed,and easily to be used library. The Xserver implements 90% functionalities of Ethernet communication. Refer the rich demo programs we provided, software engineer can easily finish the 10% remaining funtionalities and greatly shorten the developing time.The I-8431 is equipped with an ethernet port, and their backplane is equipped with 3 serial COM Port, they include RS-232 and RS-485 ports and can be used in remote data acquisition and control applications, including environment monitoring, power management and factory automation. By using S-256 (256 KBytes) or S-512 (512 KBytes)battery backup SRAM, they provide data logger storage function. (S256 and S512 are optional accessories)
Price on request
... 4 available
I-7188D-512 CR
€244.00*
Controller/No Ethernet/MiniOS7/CLanguage/512KB/LEDThe I-7188D-512 is for industry applications and can be used to replace PC or PLC devices in harsh environments. The I-7188D-512 controller is designed for palm-size embedded systems that require high reliability, PC-compatibility, and compactness at a reasonable price.The controllers can be integrated into an OEM product as a processor core component. By building your product around I-7188D-512 controller, you reduce the time from design to market introduction, cut development costs, minimize technical risks, and deliver a more reliable product. Depending on the type of embedded firmware programs that are being developed, the I-7188D-512 can be used as a single versatile controller.
WISE-7118Z/S2 CR
€284.00*
POE Controller/Modbus TCP/10DI/TC/6DO/isol/DN-1822WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers just a few clicks away; no programming is required. With its powerful and easy-to-use features, it will minimize the learning curve, shorten time to market and dramatically reduce the effort and cost spent on system development. WISE-7118Z/S2 follows IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs (Category 5 Ethernet cable). This feature provides greater flexibility and higher efficiency therefore simplifying systems design, saving space, reducing cables and eliminating the requirement for dedicated electrical outlets. Meanwhile, in case under a non-PoE environment, WISE-7118Z/S2 will still be able to receive power from auxiliary power sources like AC adapters or battery, etc. This multi-function module WISE-7118Z/S2 supports Modbus/TCP protocol to make seamless integration with SCADA software available. It features 16-bit, 10-channel differential analog inputs and 6-channel digital ouputs. Each analog channel is allowed to configure an individual range and has 240 Vrms high over voltage protection.
... 1 available
I-7188-512 CR
€217.00*
Controller/No Ethernet/MiniOS7/C Language/512KBThe I-7188/512 is for industry applications and can be used to replace PC or PLC devices in harsh environments. The I-7188/512 controller is designed for palm-size embedded systems that require high reliability, PC-compatibility, and compactness at a reasonable price.
The controllers can be integrated into an OEM product as a processor core component. By building your product around I-7188/512 controller, you reduce the time from design to market introduction, cut development costs, minimize technical risks, and deliver a more reliable product. Depending on the type of embedded firmware programs that are being developed, the I-7188/512 can be used as a single versatile controller.
WISE-7519ZM/S2 CR
€384.00*
IoT Controller/MQTT/Modbus TCP/10AI/3DO/DN-1822WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers just a few clicks away; no programming is required. With its powerful and easy-to-use features, it will minimize the learning curve, shorten time to market and dramatically reduce the labor and cost spent on system development. WISE-7519ZM/S2 is specifically designed for extremely accurate thermocouple measurement and features automatic cold-junction compensation for each channel to ensure temperature output consistency and stable temperature output in the field. Current input and voltage input are both supported. Open thermocouple detection and ESD/ EFT/Surge protection mechanisms are also included. The three digital output channels can be set as alarm outputs. WISE-7519ZM/S2 follows IEEE 802.3af-compliant Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs. In additional to this, WISE-7519ZM/S2 also has a built-in two-port Ethernet switch to implement daisy-chain topology. The cabling is much easier and total costs of cable and switch are significantly reduced. By integrating with IF-THEN-ELSE rule engine, WISE-7519ZM/S2 provides powerful functions such as I/O Monitoring/Control, Counter, Timer, Schedule, non-SSL E-mail sending & CGI Command sending for use in various industrial applications. WISE-7519ZM/S2 also supports Modbus TCP and MQTT protocols to make seamless integration with SCADA, IT and IoT (Internet of Things) system.
µPAC-7186PEX-G CR
€215.00*
Controller/PoE/MiniOS7/C LanguageThe uPAC-7186PEX is a palm-size programmable automation controller with RS-232/485 and Ethernet communication interfaces. ICP DAS provides easy-to-use software development tool kits (MiniOS7 framework, Modbus libraries). Users can use them to easily integrate serial devices to have Ethernet/Internet communication ability and through the standard Modbus protocol to communicate with SCADA software (Indusoft, ISaGARF, DasyLab, Trace Mode, Citect, iFix, etc.).For hardware expansion, the uPAC-7186PEX also supports an I/O expansion bus. A cost-effective I/O expansion board with A/D, D/A, D/I, D/O and serial ports is available. Nearly all kinds of I/O functions can be implemented by this bus. But the bus can support only one board. There are more than 50 boards available for uPAC-7186PEX, you can choose one of them to expand hardware features.The uPAC-7186PEX features true IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) using a standard category 5 Ethernet cable to receive power from a PoE switch like the NS-205PSE.
I-8411-G CR
€331.00*
Controller/Intel 80188/MiniOS7/C Lang/4slots/512KBThe I-8411-G is a serial embedded controller with 4 I/O slots. Both are equipped with MiniOS7,an embedded OS similar to DOS that is developed by ICPDAS Co., LTD. The MiniOS7 can boot up in a very short time (0.4 ~ 0.8 second).It has built-in hardware diagnostic function, and supports the full functions to access all 8K and 87K series I/O modules, such as DI, DO, DIO, AI, AO, Counter/Frequency, motion modules etc.The I-8411-G backplane is equipped 4 serial COM Port, they include RS-232 and RS-485 ports and can be used in remote data acquisition and control applications, including environment monitoring, power management and factory automation. By using S-256 (256 KBytes) or S-512 (512 KBytes) battery backup SRAM, they provide data logger storage function.
VP-1231-CE7 CR
€997.00*
"ViewPAC Controller/Cortex-A8/CE7/3slots/5.7"" LCD"The VP-1231-CE7 are CE7 based ViewPAC that combine computing, I/O, and operator interface into a single unit, and provide the perfect solution for integrating HMI, data acquisition and control in an individual PAC. It is equipped with an ARM Cortex-A8 (32-bit and 1 GHz) CPU, TFT LCD and a variety of input/output ports (USB, Ethernet, RS-232/485). Local I/O slots are available to use our I-8K and I-87K series I/O modules and remote I/O expansion is available to use our Ethernet I/O modules and RS-485 I/O modules. Designed to operate over a wide -10 °C to 60 °C ambient temperature range, the fanless design offers the ultimate in reliability with no moving parts. Windows Embedded Compact 7 is a componentized, hard real-time, high performance, and highly reliable operating system. CE7 delivers rich user experiences and a unique connection to Windows PCs, servers, services, and devices.
IP-8841-MTCP CR
€559.00*
Controller/C Language/MTCP/8slotsiP-8841-MTCP series is a Modbus TCP I/O expansion unit to expand I-8K and I-87K series I/O modules over the Ethernet for industrial monitoring and controlling applications. There are more than 50 I/O modules supported with the unit, including analog input/output, digital input/output, counter, frequency I/O modules. It is designed to be used in harsh and noisy environment, so the hardware is manufactured with wide power input range (10 ~ 30 VDC), isolated power input and can operate under wide temperature (-25 ~ +75 °C). To simplify installation and maintenance of I/O modules, it provides many useful features, such as: auto configuration, LED indicators for fault detection, dual watchdog to keep alive, programmable power on and safe values for safety.
Modbus is a very wide known protocol in the industrial manufacturing and environment monitoring fields. Many SCADA software, HMI and PLC has builtin driver to support Modbus devices. Besides, we also provide SDK on different platforms, such as Windows XP, Window CE 5.0/6.0, Linux, MiniOS7. Therefore, it is very easy to integrate remote I/O to customer’s applications. Further more, the iP-8841-MTCP is also a c language based programmable controller that equipped a DOS-like OS (MiniOS7). Programmers can use C compilers that can create 16 bit executable file (*.exe) to customize the Modbus firmware which preinstalled in the iP-8841-MTCP. The SDK provides rich functions for Modbus communication, such as Modbus TCP master/slave, Modbus RTU master/salve, Modbus ASCII master/slave, etc.
Automation controller with 1 to 8 I/O expansion slots
A variety of interfaces, such as VGA, USB, Ethernet, RS-232/485 allow a flexible connection. For modular expansion with analog and digital input and output modules, you can choose between automation controllers with 1 to 8 I/O expansion slots.For further information on our "Automation Controller" product range, please contact our technical experts at any time. Simply contact us or use our live chat function.
For tough industrial applications
The controllers from ICPDAS have proven themselves in the harsh industrial environment. The robust construction, alternatively in a high-quality metal housing, is ideal for demanding environments. Of course, all PACs always run in fanless operation.
Thanks to the compact design, it can be mounted on DIN-rail or directly in the control cabinet. The wide temperature range from -25°C to +75°C and the tolerant voltage input of +10 ~ +30 VDC round off the industrial character of the automation controllers.
Flexible in application
Our powerful automation controllers are suitable for high processing speeds and data-intensive applications. Just as required in process and production automation. Designed for the control and adjustment of installations with short reaction times, PACs from ICPDAS are also used for fast machines.
