Signal Conditioning
... 7 available
SG-3016-G CR
€214.00*
Input Module/Strain Gauge/1AI/1AO/1VO/isol./600HzThe SG-3016 is a voltage input to voltage or current output signal conditioning module. It has 1000 Vdc three-way isolation for input, output and power. It also can change the input/output range via internal configuration switches. The SG-3016 has an LED display to show whether the SG-3016 is functioning correctly and has three VRs (Zero, Span, Exci) to calibrate accuracy of the input/output range . The bandwidth of the SG-3016 is typically 600 Hz. It is easy to mount the SG-3016 on a standard DIN rail and operate in environments with wide temperature range.
... 2 available
tM-SG4 CR
€31.00*
Pull-high/Pull-low Module/RS-485The tM-SG4 is an optional module that is used to improve the communication of RS-485 network. It provides switch selectable pull-high and pull-low resistors on RS-485 network. It also has 15-step switch selectable termination resistor such that the user can select a proper termination resistor to be connected to the RS-485 network easily. If the RS-485 network is not over 100 meters, the termination resistors are not needed. Otherwise, it may be necessary to insert two termination resistors at both end of the RS-485 network. It is not easy to calculate the value of a termination resistor on the RS-485 network. The best way to do this is to use an oscilloscope to check the RS-485 signal directly. If the impedance match of RS-485 network is OK, the oscilloscope will show a very nice square wave. If these square wave signals are distorted, the user will need to insert two termination resistors at both end of the RS-485 network.
... 1 available
SG-3071-G CR
€160.00*
Input/Output Module/DC Voltage/1AI/1AO/isol.The SG-3071 is a voltage input to voltage or current output signal conditioning module. It can access either bipolar or unipolar voltage input range. It has 1000 Vdc three-way isolation for input, output and power. It can change the input/output range via internal configuration switches. The SG-3071 has an LED display to show whether the SG-3071 is functioning correctly and has two VRs (Zero, Span) to calibrate accuracy of the input/output range. The bandwidth of the SG-3071 is typically 1 KHz. It is easy to mount the SG-3071 on a standard DIN rail and operate in environments with wide temperature range.
PW-3090-12S-R CR
€102.00*
Power Module/isol./12VThe PW-3090 series is an efficient (83%) DC-to-DC power module with 1000 VDC isolated protection. It has non-regular DC input (18 ~ 36 V) and stable DC output (5 V, 12 V, 24 V, 5 V, 15 V). Using it, your devices can work with stable power source and against harmful effects in the operating environment. It has non-regular DC input (36 ~ 72 V) and stable DC output (24.7 V). Using it, your devices can work with stable power source and against harmful effects in the operating environment.
DN-843I-CT-10 CR
€173.00*
Current Transformer/Input/AC/DC/±10 Amp/3 Ch.The maximum input range is from ±1 A to +/- 50 A and can be attenuated to from ±1.6 V to ±10 V. The "I" version provide 3000 VDC intra-modules isolation and 3000 VDC channel to channel isolation to avoid the noise interference from inputs to outputs or channel to channel. It can be used with the analog input modules such as I-7017 and I-87017 etc. to measure the high current.
SG-3383 CR
€199.00*
Input/Output Module/1 AI to 3AOThe SG-3383 DC current signal splitters accept one 4 to 20 mA current input and provide three optically isolated 4 to 20 mA current outputs that are linearly related to the 4 to 20 mA current input. This provides an economical solution when one signal must be sent to three different devices. Typical applications include isolation, output splitting, output device separation and redundancy (i.e. to prevent failure of the entire loop if one device fails), or a combination of these. The input signal is filtered, amplified, split, and then passed through an opto-coupler to the output stages. Full 3-way isolation (input, output, power) , 4 kV EFT Protection for Power Line and 8 kV ESD Protection make this module useful for ground loop elimination, common mode signal rejection,and noise pickup reduction. The SG-3383 includes an LED display that can be used to indicate whether the module is functioning correctly, and also includes VRs (Zero, Span) that can be used to calibrate the output range accuracy. The input bandwidth of the SG-3383 is typically 2.5 kHz.
DN-843I-CT-1 CR
€229.00*
Current Transformer/Input/AC/DC/±1 Amp/3 Ch.The maximum input range is from ±1 A to +/- 50 A and can be attenuated to from ±1.6 V to ±10 V. The "I" version provide 3000 VDC intra-modules isolation and 3000 VDC channel to channel isolation to avoid the noise interference from inputs to outputs or channel to channel. It can be used with the analog input modules such as I-7017 and I-87017 etc. to measure the high current.
DN-843I-CT-20 CR
€184.00*
Current Transformer/Input/AC/DC/±20 Amp/3 Ch.The maximum input range is from ±1 A to +/- 50 A and can be attenuated to from ±1.6 V to ±10 V. The "I" version provide 3000 VDC intra-modules isolation and 3000 VDC channel to channel isolation to avoid the noise interference from inputs to outputs or channel to channel. It can be used with the analog input modules such as I-7017 and I-87017 etc. to measure the high current.
DN-843VI-600V CR
€387.00*
Voltage Input Attenuator/3Ch/600VDC/isolThe DN-800V series are voltage input attenuator. The maximum input range is from ±80 V to +/- 600 V and can be attenuated to ±10 V. The "I" version provide 3000 VDC intra-modules isolation and 3000 VDC channel to channel isolation to avoid the noise interference from inputs to outputs or channel to channel. It can be used with the analog input modules such as I-7017 and I-87017 etc. to measure the high voltage.
PW-3090-15D-R CR
€102.00*
Power Module/isol./15VThe PW-3090 series is an efficient (83%) DC-to-DC power module with 1000 VDC isolated protection. It has non-regular DC input (18 ~ 36 V) and stable DC output (5 V, 12 V, 24 V, 5 V, 15 V). Using it, your devices can work with stable power source and against harmful effects in the operating environment. It has non-regular DC input (36 ~ 72 V) and stable DC output (24.7 V). Using it, your devices can work with stable power source and against harmful effects in the operating environment.
SG-3227 CR
€227.00*
Signal Conditioner/2x IEPE InputsSG-3227 is a 2-channel IEPE signal conditioner. It has 2mA/4mA/6mA/10mA excitation current for sensors with integrated amplifiers. It features three selectable gain x1/x10/x100 ranges individually for two channels. LED failure indicators for sensor condition minimize the risk of handling errors.
SG-3011-G CR
€190.00*
Input Module/Thermocouple/1AI/1AO/isol.The SG-3011 module is a thermocouple input signal conditioner that uses a microprocessor-controlled high-resolution 24-bit integrated A/D converter to acquire the thermocouple signal and the cold junction compensation input. Temperature measurement is performed using the thermocouple linearization and cold junction compensation function. The range of thermocouple types supported by the SG-3011 module include J, K, T, E, R, S, B, N, C, L, M, L2 (DIN43710). The response time for the SG-3011 module is 100 ms. the response time for the SG-3011 is switch selectable and can be set to either 0.5 ms or 100 ms. The power supply that drives the input and output circuitry in the module is internally isolated, enabling the SG-3011 to offer true channel-to-channel isolation. The SG-3011 module is easily mounted on a standard DIN rail, and the module can operate in harsh environments with a wide temperature range.
SG-770 CR
€87.00*
Surge Protector/7/14 ChSG-770 offers 7 differential or 14 single-ended for surge protection. SG-770 is approved with IEC 61000-4-5 and IEC 61000-4-12 standards. Each of channels supports 0 V ~ ±30 V signal and each of channels is protected for surge achieves 6 kV.
PW-3090-24S-R CR
€102.00*
Power Module/isol./24VThe PW-3090 series is an efficient (83%) DC-to-DC power module with 1000 VDC isolated protection. It has non-regular DC input (18 ~ 36 V) and stable DC output (5 V, 12 V, 24 V, 5 V, 15 V). Using it, your devices can work with stable power source and against harmful effects in the operating environment. It has non-regular DC input (36 ~ 72 V) and stable DC output (24.7 V). Using it, your devices can work with stable power source and against harmful effects in the operating environment.
DN-843V-600V CR
€149.00*
Voltage Input Attenuator/3Ch/600VDC/non-isolThe DN-800V series are voltage input attenuator. The maximum input range is from ±80 V to +/- 600 V and can be attenuated to ±10 V. The "I" version provide 3000 VDC intra-modules isolation and 3000 VDC channel to channel isolation to avoid the noise interference from inputs to outputs or channel to channel. It can be used with the analog input modules such as I-7017 and I-87017 etc. to measure the high voltage.
SG-3013-G CR
€180.00*
Input Module/RTD/1AI/1AO/isol.The SG-3013 is a RTD input to voltage or current output signal conditioning module. It has 1000 Vdc three-way isolation for input, output and power. It also can change the input/output range via internal configuration switches. It's easy to mount the SG-3013 on a standard DIN rail and can operate in environments with wide temperature range.