I/O Modules with serial and Ethernet based protocols
For more than twenty years, we have been offering a wide range of I/O modules under the ICPDAS brand for the entire automation sector (measurement, control and regulation). Under the product name ICPCON you will find I/O modules for all common protocols and with different combinations of inputs and outputs.
Selection Guides for DCON/ MODBUS RTU
Selection Guides for MODBUS TCP
... 22 available
Power Adapter for UC Series
€6.00*
AC/DC Converter 6W/12VDC/0.5A/Bare WireAC/DC Converter 6W/12VDC/0.5A/Bare Wire
... 21 available
I-87017W-G CR
€213.00*
I/O Module/DCON/8AIThe I-87017RW is an analog input module with an extremely high-quality protection mechanism where the overvoltage protection can be as high as 240 Vrms. The input type can be set to either voltage or current. The I-87017RW is an upgraded version of I-87017W, with the only differences being that the I-87017RW is more suitable for critically harsh environment. The sampling rate for the I-87017RW is can be adjusted to either fast mode or normal mode depending on individual requirements. The I-87017RW also provides 4 kV ESD protection as well as 3000 VDC intra-module isolation.
... 14 available
CAN-2055C CR
€167.00*
I/O Module/CANopen/Slave/8DO/8DI/LEDCANopen is one kind of the network protocols based on the CAN bus and mainly used for embedded network of machine control, such as industrial machine control , aircraft engines monitoring, factory automation, medical equipment control, remote data acquisition, environmental monitoring, and packaging machines control, etc. CAN-2055C module follows the CiA-301 version 4.02 and CiA-401 version 2.1. You can access the digital I/O status and set the configuration by using standard CANopen protocol. CAN-2055C has passed the validation of the CiA CANopen conformance test tool. Therefore, you can use it with standard CANopen master easily by applying the EDS file. CAN-2055C has 8 isolated sink/source input channels and 8 isolated source output channesl, It can be used to various applications, such as PNP, NPN, TTL, relay contact and so forth. By owing to the CANopen masters of ICP DAS, you can quickly build a CANopen network to approach your requirements. For more information about the CANopen master interfaces and other CANopen products, please refer to the following web site.
... 11 available
I-87057W-G CR
€92.00*
I/O Module/DCON/16 DO/Open Collector/100mAI-87057W offers 16-channel sink type digital outputs. All channels features Photocouple isolation. I-87057W has 16 LED indicators for DO channel status. 4 KV ESD protection and 3750 V intra-module isolation are standard.
... 7 available
I-7017F CR
€193.00*
I/O Module/DCON/8AI/FASTThe I-7017 and I-7017F are analog input modules that provide either 8 differential input channels, or 6 differential input channels and 2 singleended input channels selectable via a jumper. The input type includes both voltage and current, and all channels are available for the same input range. An optional external 125 Ω resistor is required for current input. The modules also feature 3000 VDC intra-module isolation as well as +/-120 VDC overvoltage protection. The sampling rate of the I-7017F is adjustable, meaning that either fast mode or normal mode can be selected. The M-7017 supports both the Modbus RTU and DCON protocols, which can be configured via software, and provides 8 differential analog input channels. Other hardware specifications are the same as the I-7017.
... 7 available
I-7041D CR
€101.00*
I/O Module/DCON/14DI/LEDThe I-7041 and I-7041P provide 14 channels for digital input, each of which features photocouple isolation. In addition, either sink- or source-type digital input can be selected via wire connections, and all channels are able to be used as 16-bit counters. The I-7041D and I-7041PD include 14 LED indicators that can be used for DI channel status monitoring. 4 kV ESD protection and 3750 VDC intra-module isolation are standard. The hardware specifications for the M-7041 and M-7041P are the same as for the I-7041 and I-7041P, and support both the Modbus RTU and DCON protocols, which can be configured via software. ICPDAS recommends selecting the "P" version of the digital input module for industrial use.
... 6 available
I-7017RC CR
€227.00*
I/O Module/DCON/8AI/CurrentThe I-7017C is an 8-channel current input module that is specifically designed to measure current only. Its user-friendly design saves both time and effort when measuring a current thanks to a built-in resistor, meaning that you can now measure current directly. The I-7017RC is an upgraded version of the I-7017C, with the only difference being that the I-7017RC is much more suitable for critically harsh environments. The I-7017RC also has 4 kV ESD protection and +/- 200 VDC common voltage as current input protection, and also features 3000 VDC intra-module isolation and open wire detection for 4 ~ 20 mA input. The sampling rate of the I-7017RC and I-7017FC is adjustable, meaning that either fast mode or normal mode can be selected. The M-7017C and M-7017RC has the same specifications as the I-7017C and M-7017RC, but provides additional support for the Modbus RTU protocol as well as the DCON protocol.
... 6 available
I-7024 CR
€233.00*
I/O Module/DCON/4AO/14bitThe I-7024 is a 14-bit 4-channel analog output module that provides current and voltage outputs. There are options for power-on values and safe values. It features 3000 VDC intra-module isolation. The I-7024R is the same as the I-7024 and provides additional 5-channel digital inputs and 4 KV ESD protection on each terminal. The M-7024/M-7024R support Modbus RTU and DCON protocols and can be configured via software. Their hardware specifications are the same as those of the I-7024/I-7024R.
... 6 available
I-7041PD CR
€107.00*
I/O Module/DCON/14DI/LEDThe I-7041 and I-7041P provide 14 channels for digital input, each of which features photocouple isolation. In addition, either sink- or source-type digital input can be selected via wire connections, and all channels are able to be used as 16-bit counters. The I-7041D and I-7041PD include 14 LED indicators that can be used for DI channel status monitoring. 4 kV ESD protection and 3750 VDC intra-module isolation are standard. The hardware specifications for the M-7041 and M-7041P are the same as for the I-7041 and I-7041P, and support both the Modbus RTU and DCON protocols, which can be configured via software. ICPDAS recommends selecting the "P" version of the digital input module for industrial use.
Analog and digital I/Os
The acquisition of analog signals is carried out via the direct connection of volts, mV, mA, thermocouples, Pt100, Pt1000 and strain gauges. We also offer counter inputs for digital inputs. For the control and regulation of important outputs you can choose between analog (V, mV, A) and digital as well as relay outputs.
ICPDAS has the right I/O module for every application. We would be pleased to advise you personally on the selection of the appropriate module. Simply send us your specifications via the contact form and we will make you an individual offer.
Simple recording of process data
Especially in the environment of IIoT, it is becoming more and more important to collect additional process data. The challenge here is not to influence the reliable and stable operation of the application. The proven I/O module series from ICPDAS create the ideal prerequisites for a process-accompanying and simple data acquisition.
The simple configuration of the I/O modules enables fast integration without affecting the existing processes. For decentralized remote applications, we recommend our modules with compact and small design. Our multi-channel systems, which combine more than 100 channels in one place, are particularly suitable for central applications. Of course, a combination of central and decentralized systems is always possible.
I/O modules for harsh industrial environments
All I/O modules are equipped with a DIN rail and control cabinet mounting option as standard for quick installation. The configuration options for the power-on values and safe value settings ensure important safety functions for harsh environments. Due to the robust design, the I/O modules can be used universally in a temperature range of -25°C ~ +75°C. The safe power supply via the +10 ~ +30 VDC input with overvoltage protection rounds off the industrial character of the I/O module series from ICPDAS.