Industrial Ethernet Switch
In industrial communication, networks must meet the special requirements of the industrial environment. ICPDAS Industrial Ethernet Switches are ideally suited for the establishment of an Ethernet network, enabling smooth data traffic.
The transmission speeds in the Ethernet network are 10Mbit/s, 100 Mbit/s (Fast Ethernet) and 1000Mbit/s (Gigabit Ethernet). There are a number of standards for Ethernet, all of which are specified in IEEE standard 802.3.
.. 125 in stock!
NSM-208G CR
Ethernet Switch/8 Ports/Gigabit/MetalThe NSM-208G has 8 Ethernet Switching ports that support 10/100/1000 Base-T, with a 10/100/1000M auto negotiation feature and auto MDI/MDI-X function. It can connect 8 workstations and automatically switches the transmission speed (10 Mbps or 100 Mbps or 1000 Mbps) for corresponding connections. The flow control mechanism is also negotiated. There is link/data rate LEDs for each port to aid troubleshooting. Port connectors are shielded RJ-45.
€264.00*
.. 24 in stock!
NS-205 CR
Ethernet Switch/5 PortThe NS-205 has 5 Ethernet Switching ports that support 10/100 Base-TX, with a 10/100M autonegotiation feature and auto MDI/MDI-X function. It can connect 5 workstations and automatically switches the transmission speed (10 Mbps or 100 Mbps) for corresponding connections. The flow control mechanism is also negotiated. There is activity/link/data rate LEDs for each port to aid trouble-shooting. Port connectors are shielded RJ-45. It contains "soft start" function with overload protection, high-low voltage protection. The width of the NS-205 is just 33 mm, so it can be used where space is limited.
€94.00*
.. 13 in stock!
NS-208 CR
Ethernet Switch/8 PortsThe NS-208 has 8 Ethernet ports that support 10/100 Base-TX, with a 10/100M auto negotiation feature and auto MDI/MDI-X function. All Ethernet ports have memory buffers that support the store-and-forward mechanism, which assures that data can be transmitted properly. The NS-208 supports advanced network standards to optimize network performance, reduce maintenance costs, and secure network safety. The flow control mechanism is also negotiated. There is link/data rate LEDs for each port to aid troubleshooting. Port connectors are shielded RJ-45.
€149.00*
.. 6 in stock!
NSM-216 CR
Ethernet Switch/16 Ports/MetalThe NSM-216 has 16 Ethernet ports that support 10/100 Base-TX, with a 10/100M auto negotiation feature and auto MDI/MDI-X function. It can connect 16 workstations and automatically switches the transmission speed (10 Mbps or 100 Mbps) for corresponding connections. All Ethernet ports have memory buffers that support the store-and-forward mechanism, which assures that data can be transmitted properly. The NSM-216 supports advanced network standards to optimize network performance, reduce maintenance costs, and secure network safety. The flow control mechanism is also negotiated. There is link/data rate LEDs for each port to aid troubleshooting. Port connectors are shielded RJ-45.
€414.00*
.. 4 in stock!
NS-205PSE CR
POE Switch/5 ports/unmanagedThe NS-205PSE is a 5-port unmanaged PoE (Power over Ethernet) Industrial Ethernet switch; it supports 4 PoE ports which are classified as power source equipment (PSE). The NS-205PSE makes centralized power supply come true and provides up to 15.4 watts of power per PSE port.
€167.00*
.. 1 in stock!
NSM-108 CR
Ethernet Switch/8 Ports/MetalThe NSM-108 has 8 Ethernet ports that support 10/100 Base-TX, with a 10/100M auto negotiation feature and auto MDI/MDI-X function. All Ethernet ports have memory buffers that support the store-and-forward mechanism, which assures that data can be transmitted properly. The NSM-108 supports advanced network standards to optimize network performance, reduce maintenance costs, and secure network safety. The flow control mechanism is also negotiated. There is link/data rate LEDs for each port to aid troubleshooting. Port connectors are shielded RJ-45.
€218.00*
.. 1 in stock!
NS-208A CR
Ethernet Switch/8 Ports/unmanaged/12-48VDCThe NS-208A has 8 Ethernet ports that support 10/100 Base-TX, with a 10/100M auto negotiation feature and auto MDI/MDI-X function. All Ethernet ports have memory buffers that support the store-and-forward mechanism, which assures that data can be transmitted properly. The NS-208A supports advanced network standards to optimize network performance, reduce maintenance costs, and secure network safety. The flow control mechanism is also negotiated. There is link/data rate LEDs for each port to aid troubleshooting. Port connectors are shielded RJ-45.
€131.00*
.. 1 in stock!
NSM-205FC CR
Ethernet Switch/4 Eth/1 Fiber/SC/Mu-Mod/2km/MetalThe NSM-205FC is a 4-port unmanaged Ethernet with 1 fiber port switch. Using fiber optics, you can prevent noise from interfering with your system and supports high-speed (100 Mbps) and high-distance (up to 2 km) transmissions. The NSM-205FC provides a wide 10 to 30 VDC power range to fit all the common power standards found in industrial automation, without external power converters. The wide power input lowers installation and maintenance costs.
€253.00*
NSM-205FT CR
Ethernet Switch/4 Eth/1 Fiber/ST/Mu-Mod/2km/MetalThe NSM-205FT is a 4-port unmanaged Ethernet with 1 fiber port switch. Using fiber optics, you can prevent noise from interfering with your system and supports high-speed (100 Mbps) and high-distance (up to 2 km) transmissions. The NSM-205FT provides a wide 10 to 30 VDC power range to fit all the common power standards found in industrial automation, without external power converters. The wide power input lowers installation and maintenance costs.
€246.00*
NS-208PSE CR
PoE Switch/8 ports/8 PoEThe NS-208PSE is an 8-port unmanaged PoE (Power over Ethernet) Industrial Ethernet switch, it supports 8 PoE ports which are classified as power source equipments (PSE). The NS-208PSE makes centralized power supply come true and provides up to 15.4 W of power per port. The NS-208PSE can be used to power IEEE802.3af compliant powered devices (PD) by Ethernet cable and eliminates the need for additional power wiring.
€250.00*
NSM-205G-1SFP CR
Ethernet Switch/4LAN/1Fiber/unmanaged/MetalThe NSM-205G-1SFP is 4 Port 10/100/1000 Base copper and 1 Gigabit fiber optic/copper combo port Ethernet Switch, Supports Auto Negotiation, Auto MDI/MDI-X, high-speed(1Gbps) and high-distance transmissions. Apart from this, NSM-205G-1SFP supports dual power and provides +12 VDC ~ +48 VDC power range to fit all the common power standards found in industrial automation, without external power converters.
€153.00*
NSM-206FT CR
Ethernet Switch/4 Eth/2 Fiber/ST/Mu-Mod/2km/MetalThe NSM-206FT is a 4-port unmanaged Ethernet with dual fiber port switch. Using fiber optics, you can prevent noise from interfering with your system and supports high-speed (100 Mbps) and high-distance (up to 2 km) ransmissions. The NS-206F/NSM-206F provides a wide 10 to 30 VDC power range to fit all the common power standards found in industrial automation, without external power converters. The wide power input lowers installation and maintenance costs.
€344.00*
NS-208PSE-M12-IP67 CR
Ethernet Switch/unmanaged/8PoE M12/IP67The NS-208PSE-M12-IP67 is designed for industrial applications in harsh environments. The M12 connectors ensure tight, robust connections, and guarantees reliable operation, even for applications that are subject to high vibration and shock. The NS-208PSE-M12-IP67 PoE switch provides 8 fast Ethernet M12 ports with 8 IEEE 802.3af compliant PoE ports. The switch is classified as power source equipment (PSE) and provide up to 15.4 W of power per port. The Ethernet switch supports IEEE 802.3/802.3u/802/3x with 10/100M, full/half-duplex, MDI/MDI-X auto-sensing, and provides an economical solution for your industrial Ethernet network.
€576.00*
RS-405 CR
Switch/Ethernet/Redundant/5 portsThe RS-405 is a 5-Port Industrial Ethernet (10/100Base-TX) Real-Time Redundant Ring Switch. RS-405 supports 10/100M auto-negotiation feature and auto MDI /MDIX function. It can automatically switch the transmission speed (10 Mbps or 100 Mbps) for corresponding connections. The connectors of Ethernet port are shielded RJ-45. The shielded RJ-45 connectors offer a high reliability Ethernet environment for industrial control and automation. Built-in ICP DAS Cyber-Ring technique that enable multiple switches to be placed into a redundant ring. Typically it detects and recovers from a copper link failure within approximately 20 ms – for the majority of applications a seamless process. The RS-405 is much more easy to use and absolutely free of software setting. After unpacking from the shipping case, it just takes one or two dip or rotary switch to make it work. The RS-405 provides two power inputs that can be connected simultaneously to live DC power sources. If one of the power inputs fails, the other live source acts as a backup to automatically support the RS-405 's power needs. And, the relay output facility can deliver warning signal while dual power or network link failure.
€361.00*
I-8135W-G CR
Ethernet Switch/5-Port/RJ-45The I-8135W is a fl exible and high performance five-port Ethernet switch module. It can be installed in PAC (XPAC, WinPAC, LinPAC, iPAC, ViewPAC, ...) and directly gets power from the backplane. An extra power adapter for an Ethernet switch is not need any more. In your PAC solutions, if you want to expand Ethernet connection, I-8135W is good to replace regular Ethernet switchs to save installation space and power adapter.
€89.00*
NSM-206PFT CR
Ethernet Switch/4PoE/2 Fiber/Multi-Mode/ST/MetalThe NSM-206PFT is 6-port unmanaged Ethernet switch supporting Power-over-Ethernet on ports 1 to 4. The switch is classified as power source equipment (PSE), and when used in this way, the NSM-206PFT enable centralization of the power supply, providing up to 30 watts. The NSM-206PFT can be used to power IEEE 802.3af/at standard devices (PD).
€338.00*
NSM-210C CR
Ethernet Switch/8 Ports/2 Fiber/Unmanaged/MetalThe NSM-210C is 8 Port 10/100 Base copper and 2 Gigabit fiber optic/copper combo port Ethernet Switch, Supports Auto Negotiation 、 Auto MDI/MDI-X 、high-speed(100 Mbps) and high-distance transmissions . Apart from this, NSM-210C supports dual power and provides a wide +12 VDC ~ +48 VDC power range to fit all the common power standards found in industrial automation, without external power converters.
€335.00*
NS-205-IP67 CR
Ethernet Switch/5-Ports/IP67 CasingThe NS-205-IP67 is designed for industrial applications in harsh environments. The rugged RJ-45 ensure tight, robust connections, and guarantee reliable operation, even for applications that are subject to high vibration and shock. The Ethernet switch support IEEE 802.3/802.3u/802/3x with 10/100M, full/half-duplex, MDI/MDI-X auto-sensing, and provide an economical solution for your industrial Ethernet network.
€252.00*
NS-208G CR
Ethernet Switch/8 Ports/GigabitThe NS-208G has 8 Ethernet Switching ports that support 10/100/1000 Base-T, with a 10/100/1000M auto negotiation feature and auto MDI/MDI-X function. It can connect 8 workstations and automatically switches the transmission speed (10 Mbps or 100 Mbps or 1000 Mbps) for corresponding connections. The flow control mechanism is also negotiated. There is link/data rate LEDs for each port to aid troubleshooting. Port connectors are shielded RJ-45.
€225.00*
NS-205A CR
Ethernet Switch/5-Port/unmanaged/12~56VDCThe NS-205A has 5 Ethernet Switching ports that support 10/100 Base-TX, with a 10/100M autonegotiation feature and auto MDI/MDI-X function. It can connect 5 workstations and automatically switches the transmission speed (10 Mbps or 100 Mbps) for corresponding connections. The flow control mechanism is also negotiated. There is activity/link/data rate LEDs for each port to aid trouble-shooting. Port connectors are shielded RJ-45. It contains "soft start" function with overload protection, high-low voltage protection. The width of theNS-205A is just 33 mm, so it can be used where space is limited.The NS-205A provides +12 VDC ~ +56 VDC power input to fit various power source.
€84.00*
NS-205AFCS-T CR
Ethernet Switch/4 Ethernet/1 Fiber/SC/Si-Mode/30kmThe NS-205AFCS-T is a 4-port unmanaged Ethernet with 1 fiber port switch. Using fiber optics, you can prevent noise from interfering with your system and supports high-speed (100 Mbps) and high-distance (up to 15 km) transmissions. The NS-205AFCS-T provides a wide 12 to 48 VDC power range to fit all the common power standards found in industrial automation, without external power converters. The wide power input lowers installation and maintenance costs.
€230.00*
NS-205AFC-T CR
Ethernet Switch/4 Ethernet/1 Fiber/SC/Mu-Mode/2kmThe NS-205AFC-T is a 4-port unmanaged Ethernet with 1 fiber port switch. Using fiber optics, you can prevent noise from interfering with your system and supports high-speed (100 Mbps) and high-distance (up to 2 km) transmissions. The NS-205AFC-T provides a wide 12 to 48 VDC power range to fit all the common power standards found in industrial automation, without external power converters. The wide power input lowers installation and maintenance costs.
€207.00*
NSM-208PSE-4 CR
PoE Switch/8 ports/4 PoE/MetalThe NSM-208PSE-4 is an 8-port unmanaged PoE (Power over Ethernet) Industrial Ethernet switch, it supports 4 PoE ports which are classified as power source equipments (PSE). The NSM-208PSE-4 makes centralized power supply come true and provides up to 15.4 W of power per port. The NSM-208PSE-4 can be used to power IEEE802.3af compliant powered devices (PD) by Ethernet cable and eliminates the need for additional power wiring.
€268.00*
RS-405FCS CR
Switch/Ethernet/Redundant/5 port/2 Fiber/Single/SCThe RS-405FCS is a 5-Port Industrial Ethernet (10/100Base-TX) Real-Time Redundant Ring Switch. The RS-405FCS series supports 10/100M auto-negotiation feature and auto MDI /MDIX function. It can automatically switch the transmission speed (10 Mbps or 100 Mbps) for corresponding connections. The connectors of Ethernet port are shielded RJ-45. The shielded RJ-45 connectors offer a high reliability Ethernet environment for industrial control and automation. Built-in ICP DAS Cyber-Ring technique that enable multiple switches to be placed into a redundant ring. Typically it detects and recovers from a copper link failure within approximately 20 ms V for the majority of applications a seamless process. The RS-405FCS is much more easy to use and absolutely free of software setting. After unpacking from the shipping case, it just takes one or two dip or rotary switch to make it work. The RS-405FCS provides two power inputs that can be connected simultaneously to live DC power sources. If one of the power inputs fails, the other live source acts as a backup to automatically support the RS-405FCS 's power needs. And, the relay output facility can deliver warning signal while dual power or network link failure.
€547.00*
The special requirements of an industrial communication network are not only fast and seamless data exchange but also reliability. Industrial Ethernet Switches from ICPDAS ensure this via redundant ring technology. Additional features such as Power-over-Ethernet (PoE) and management functions offer additional added value.
Specifications for industrial use:
- Compact plastic or metal housing
- Overvoltage protection
- Wide input voltage range up to 9-48VDC
- Mounting for DIN rail and wall
- Temperature range between -25 °C ~ +75 °C
- Protection class up to IP67
- Insensitive to high-frequency interference
Our broad product portfolio of Industrial Ethernet Switches offers you the right switch for every application. We would be pleased to advise you personally on the selection.
Unmanaged Industrial Ethernet Switch
With our unmanaged Ethernet switches, you can quickly and cost-efficiently set up an Industrial Ethernet network. The Ethernet switches are immediately ready for operation via plug-and-play. The LEDs on the housing provide a quick overview of the status of network communication at all times. The unmanaged Industrial Ethernet switches are typically used in smaller networks that do not require management functions. Easy to use, robust, for industrial purposes and with 5 to 16 ports, the unmanaged switches are an inexpensive and durable solution.
Managed Industrial Ethernet Switch
Managed Ethernet switches offer comprehensive configuration options and are often used in large networks. They provide IT administrators with comprehensive control functions that enable them to achieve optimal network performance and reliability. The Industrial Ethernet Switch can be set up via the RS-232 port or via Ethernet using Telnet or a web browser.
Specifications of Managed Ethernet Switches:
- 6 to 24 LAN ports
- 2 to 24 Gigabit ports
- SNMP monitoring via SNMP
- Turning individual ports on/off and detecting the cable assignment (Auto MDI/MDI-X)
- Bandwidth allocation and duplex operation per port
- IP address management
- Filters for MAC addresses
- spanning tree
- Port mirroring for network traffic monitoring
- Quality of Service (QoS)
- VLAN settings
- 802.1X Network Access Control
- IGMP snooping for bandwidth-saving image transmission
- Link Aggregation or Port Trunking
Layer 2 switches work with Data-Link Layer Addresses (MAC). They are very fast in data transfer because they only sort data packets by MAC addresses.
Industrial Fiber Switch
When it comes to overcoming long distances at high speed, communication via fiber optics (BASE-F) has clear advantages compared to copper cables (BASE-T). With a fiber port switch, the range of an Ethernet network can be considerably increased via fiber optics. A further advantage of Ethernet switches with fiber port is the strong industrial environment. Communication via fiber optic cables is less susceptible to temperature fluctuations and cannot be affected by electromagnetic interference.
Redundant Ring Ethernet Switch for real-time applications
Redundant ring switches enable reliable communication in the Ethernet network. Due to the ring topology, each Redundant Ring Switch can be accessed via two routes. If a switch in the ring breaks or fails, the connection is immediately established via the second way. This results in a simple and fast redundancy solution. In the event of a power supply failure or a network connection failure to the end device, warning signals can be triggered via a relay output, for example.