ECAT-2092T CR
€266.00*
Not on stock, usually ready for shipment in 10 days, delivery time 2-5 days
- Advantages
- EtherCAT IO Module
- 2x RJ-45 Ports
- 2x External Latch Input
- 2x Compare Trigger Output
- Power Input: +20 VDC ~ +30 VDC
- Operating Temperature: -25 ~ +70 °C
Product number:
140882
Customs number:
85176200
Country of origin:
Taiwan
Weight:
0.39 kg
Product information "ECAT-2092T CR"
Encoder Counter/2inputs/2outputs/32bit/4MHz
The EtherCAT slave ECAT-2092T is an incremental encoder counter which provides two independent high-speed counter channels. It reads the pulse train generated by an incremental encoder and can be used in positioning feedback applications. Each channel has two counter (A, B) and one index inputs (C). The inputs can either be single-ended or differential signals. Three counting modes are supported: clockwise/counterclockwise, pulse/direction and quadrant counting mode. Each 32-bit counter and the trigger level (falling/rising edge) can be configured and set by software.
In addition to the encoder inputs A, B and C, a latch input I for each encoder channel allows the latching and clearing of each encoder counter. Encoder position are latched at rising and falling input signal and are recorded in two separate register.
The ECAT-2092T supports position compare: Each encoder channel is equipped with one 32-bit compare register which compares the counter position with the compare position and generates an output signal when the counter reaches or passes the compare position. The compare function supports single, auto incremental and array position compare. The pulse width of the compare output can be set.
Each channel has got an adjustable input signal filter for filtering out electrical noises.
In addition to the encoder inputs A, B and C, a latch input I for each encoder channel allows the latching and clearing of each encoder counter. Encoder position are latched at rising and falling input signal and are recorded in two separate register.
The ECAT-2092T supports position compare: Each encoder channel is equipped with one 32-bit compare register which compares the counter position with the compare position and generates an output signal when the counter reaches or passes the compare position. The compare function supports single, auto incremental and array position compare. The pulse width of the compare output can be set.
Each channel has got an adjustable input signal filter for filtering out electrical noises.
| Protocol / Communication: | ETHERCAT |
|---|---|
| Digital Input: | 2 |
| Digital Output: | 2 |
| LAN Ports: | 2 |
Downloads "ECAT-2092T CR"
Login