Multiplexer Board/16AI/CA-3710/37pin/CA-2010/20pinThe DB-889D is an expansion multiplexer/ amplifier board for use with A-82X, PCI-1800 series 818 families. Each 889D multiplexes 16 differential analog input channels into one analog input of the DAS board. The high grade instrumentation provides software programmable gains of 0.5 ,1,5 ,10,50, 100, 500,and 1000. Thermocouple measurement are handled easily with 889D. The board includes cold-junction sensing and compensation circuitry that provides a scaling of 24.4 mV/?C. Biasing resistors are includes for open thermocouple detection. The 889D can be cascaded to a total of 128 channels of voltage measurements or 112 channel of thermocouple measurement.
Daughter Board/16DI/Bi-direction/The DB-16P is a 16 channel isolated digital input daughter board forA-82X board or any 812pg,711 726 , 720 series board, and PCI-Bus Multi-function board. The optically isolated inputs of the DB-16P consists of a bi-directional OPTO-coupler with a resistor for current sensing. You can use the DB-16P to sense DC signal from TTL levels up to 24V. You can also use DB-16P to sense a wide range of AC signals. You can use the board to isolated the computer from large common-mode voltages, ground loops and voltage spikes that often occur in industrial environments.
Screw Terminal Board/CA-3720/DINFemale DB37 to Screw Terminal Board with DIN-rail Mounting for PCI-1202U/1602U/1802U/822/826Include: CA-3720 (DB37 Male to Male, 45º, 2M)
Daughter Board/A-82X/37pin/PCI-1800/CA-3710/1m/DINFemale DB37 to Screw Terminal Board for A-82X series, PCI-1800U (DIN-rail Mounting)Include: CA-3710 (DB37 Male to Male, 45º, 1M)
Solid State Relay Board/24DO/CA-5015The DB-24SSR/DB-24SSRDC includes 24 normally open, or form A, solid-state relays The board interface to filed logic signals, eliminating ground-loop problems and isolating the host computer from damaging voltages. The user can use the DB-24SSR/DB-24SSRDC to switch high voltage load, up to 240 VAC/50 VDC and up to 4 A. The relay is energized by applying a 5-voltage signal to the appropriate relay channel on the 50-pin header or 37-pin D-sub connector. Twenty-four enunciator LEDs, one for each relay, light when their associated relay is activated. Because there is a D-sub 37-pin connector on the board, the user may use it to interface to any TTL output board. In other words, the user may use it as a general purpose solid state relay output board.
Relay Module/4Ch./PowerThe DN-PR4 Features a DIN-rail mount and four form C electromechanical power relays for efficient switching of load by programmed control. The contact of each relay can control a 5 A load at 250VAC/30VDC. The relay is energized by applying a +24V voltage signal to the appropriate relay channel. Each output is equipped with a LED to display their status. Each output is equipped with a varistor that shunts the surge voltage of the inductive load or electromagnetic brake to protect the relay contact point. All relay control and relay outputs are accessible through the wiring terminals.
Daughter Board/Relay/24RO/12V/24/CA-3710/DINThe DB-24PR/DB-24PRD is a 24-channel power relay output board which consists of 8 Form C and 16 Form A electromechanical relays for efficient load switching. The contact rating of each relay is 5 A at 250 VAC or 5 A at 30 VDC. These relays can be switched to ON by applying a 5 V signal from an I/O Card in the PC to the appropriate relay channels. The DB-24PR/DB-24PRD daughter board contains a single 50-pin OPTO-22 compatible connector, and a single 37-pin D-sub connector or a single 20-pin flat cable connector. The 24 onboard LEDs indicate the output status of the relays, illuminating when their associated relay is activated. To avoid overloading your PC’s power supply, this board requires either a +12 VDC or a +24 VDC external power supply.
€252.00*
Easy ordering via online shop
Directly from manufacturer
Europe-wide shipping
personal consultation
Request sent successfully
Request wasn't send - a error occured. Please try again.