PCI Express Cards

PCI Board/Express/Digital/16DI/16RO/PhotoMosThe PEX-P16POR16i is a PCI Express card. These cards provide 16 optically isolated input channels and 16 PhotoMOS Relay output channels. Both the isolated DI channels and the PhotoMOS Relay channels use a short optical transmission path to transfer an electronic signal between elements of a circuit and keep them electrically isolated. The PEX-P16POR16i card provide 2000 VDC for DI channel isolation protection, allowing the input signals to be completely floated so as to cut down ground loops, block voltage spikes, and isolate the host computer from damaging voltages. PhotoMOS Relays are used where it is necessary to control a circuit using a low-power signal (with complete electrical isolation between the control and controlled circuits), or where several circuits must be controlled by one signal. These cards can be used in various applications, such as controlling the ON/OFF state of external devices, driving external relays or small power switches, activating alarms, contact closure, sensing external voltages or switches, etc.The PEX-P16POR16i card also adds a Card ID switch on-board. Users can set Card ID and then recognizes the board by the ID via software when using two or more cards in one computer.The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications. Accessories

PCI Board/Express/32Ch./12bit/110kS/sThe PEX-1002L supports PCI Express bus. These cards are a family of A/D board and features low-gain 110 kS/s analog input. It provides 12-bit 32 single-ended or 16 differential analog inputs, 16 digital input and 16 digital output channels.The PEX-1002L also adds a Card ID switch on-board. Users can set Card ID on a board and recognize the board by the ID via software when using two or more PEX-1002L cards in one computer. The PEX-1002L provide The pull-high/ pull-low resisters allow the DI status to be specified when the DI channels are unconnected; the DI status will remain in high or low status other than floating.The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications. Accessories

PCI Board/Express/Digital/32DI/32DO/8-bitThe PEX-730 cards provide 32 isolated digital I/O channels (16 x DI and 16 x DO) and 32 TTL-level digital I/O channels (16 x DI and 16 x DO). Both the isolated DI and DO channels use a short optical transmission path to transfer an electronic signal between the elements of a circuit and keep them electrically isolated. With 3750 Vrms isolation protection, these DIO channels allow the input signals to be completely floated so as to prevent ground loops and isolate the host computer from damaging voltages. Each digital output offers a Darlington (NPN) transistor and integrated suppression diode for the inductive load. The open collector outputs (DO channels) are typically used for alarm and warning notification, signal output control, control for external circuits that require a higher voltage level, and signal transmission applications, etc.PEX-730 cards also add a Card ID switch on-board. Users can set Card ID and then recognize the board by the ID via software when using two or more cards in one computer.The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications. Accessories

PCI Board/Express/Digital/64DI/isol./24 VDCThe PEX-P64 series supports PCI Express bus. These cards provide 64 optically isolated digital input (DI) channels that use either an internal or external power supply that can be selected via a jumper. The internal power is provided by an onboard isolated DC/DC converter that provides 3000 VDC isolation and is used for connecting dry-contact input devices. These DI channels are arranged into four isolated banks when using four isolated external power supplies. DI channels 0 ~ 15 are allocated to bank A, DI channels 16 ~ 31 are allocated to bank B, DI channels 32 ~ 47 are allocated to bank C, and DI channels 48 ~ 63 are allocated to bank D. The onboard photo couplers provide 3750 Vrms isolation, and act as an interface to field logic signals, eliminate ground-loop problems, and isolate the host computer from damaging voltages. These cards contains has a single DB-37 connector and a single 40-pin male header, each of which contains 32 input channels.The PEX-P64 series also adds a Card ID switch on-board. Users can set Card ID and then recognize the board by the ID via software when using two or more PEX-P64 series cards in one computer.The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications. Accessories

PCI Board/Express/Digital/32DI/32DOhe PEX-P32A32 supports PCI Express bus. These cards provide 32 optically-isolated Digital Input channels and 32 optically-isolated Digital Output channels, arranged into four isolated banks. Each Digital Output channel includes a PNP transistor and an integral suppression diode for the inductive load. Isolated input channels 0-15 are allocated to Group A, while channels 16-31 are allocated to Group B. Isolated output channels are allocated to Groups C and D. The photocoupler input for the PISO-P32A32U-5V can be powered by either an internal current source or an external power supply, while the input for the PEX-P32A32 operates using an external power supply only.The PEX-P32A32 also include an onboard Card ID switch that enables the board to be recognized via software if two or more boards in the same computer.The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications. Accessories

PCI Board/Express/Digital/96 DI/O/SCSI II/non isoThe PEX-D96S supports PCI Express bus. These cards provide 96 TTL Digital I/O lines that consist of twelve 8-bit bi-directional ports. Each group of three 8-bit ports is arranged on the connector as Port A (PA), Port B (PB) and Port C (PC), respectively, and all ports are configured as inputs ports on power-up or after a reset.The PEX-D96S provides a single high-density connector that reduces the amount of installation space required for the card in the computer. The PEX-D96S cards include an onboard Card ID switch that enables the board to be recognized via software if two or more boards are installed in the same computer. The pull-high/low jumpers allow the DI status to be predefined instead of remaining floating if the DI channels are disconnected or interrupted.The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications.  Comparison Table Model Interface DI Pull-High/Low Compatibility Advantage PEX-D96S PCI Express Yes 5 V/CMOS Low power consumption、 Low temperature PIO-D96SU Universal PCI Yes 5 V/CMOS Low power consumption、 Low temperature PIO-D96U Universal PCI Yes 5 V/TTL High DO Driving  (Output Capability) Accessories

PCI Board/Express/16AI SE/12DI/12DO/200kS/sThe PCIe-8622 is a powerful multifunction board based on the PCI Express. With a FIFO of 2048 samples, the maximum sampling rate of PCIe-8622 is up to 200 kS/s with 16 16-bit A/D converters simultaneously sampling on each channel. The PCIe-8622 has two 16-bit voltage output (D/A) channels, 12 digital input channels, 12 digital output channels, and two PWM output channels.PCIe-8622 supports more kinds of trigger modes for A/D conversion: software trigger, internal pacer trigger and external pacer trigger. The software trigger can acquire a sample whenever needed, while the internal pacer saves CPU loading by triggering the sampling at pre-programmed frequency. An external pacer can be used for triggering by external frequency source. The PCIe-8622 also includes an onboard Card ID switch that can be used to set a unique ID for each board so that they can be instantly recognized if two or more boards are installed in the same computer.The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications. Accessories

PCI Board/Express/Analog/4ch./16bit/16DI/16DOFor the PEX-DA series, their voltage output range is from -10 V to +10 V, and their current output range is from 0 to 20 mA. In addition, These cards also feature the following advantages by ICP DAS's innovation: Accurate and easy-to-use calibration. ICP DAS provides the software calibration instead of the manual calibration so that no jumpers and trim-pots are required anymore.The calibration information can be saved in EEPROM for long-term use. Individual channel configuration.In other words, every channel can be individually configured as voltage output or current output! ICP DAS provides the Card ID function. Users can set card ID for each card and then recognize them one by one when more than two boards are used in a computer.The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications. Accessories

PCI Board/Express/8AI SE/4DI/4DO/200kS/sThe PCIe-8620 is a powerful multifunction board based on the PCI Express. With a FIFO of 2048 samples, the maximum sampling rate of PCIe-8620 is up to 200 kS/s with 8 16-bit A/D converters simultaneously sampling on each channel. The PCIe-8620 has 4 digital input channels, 4 digital output channels, and two PWM output channels.PCIe-8620 supports more kinds of trigger modes for A/D conversion: software trigger and internal pacer trigger. The software trigger can acquire a sample whenever needed, while the internal pacer saves CPU loading by triggering the sampling at pre-programmed frequency. The PCIe-8620 also includes an onboard Card ID switch that can be used to set a unique ID for each board so that they can be instantly recognized if two or more boards are installed in the same computer.The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications. Accessories

PCI Board/Express/Digital/64DI/isol.The PEX-P64 series supports PCI Express bus. These cards provide 64 optically isolated digital input (DI) channels that use either an internal or external power supply that can be selected via a jumper. The internal power is provided by an onboard isolated DC/DC converter that provides 3000 VDC isolation and is used for connecting dry-contact input devices. These DI channels are arranged into four isolated banks when using four isolated external power supplies. DI channels 0 ~ 15 are allocated to bank A, DI channels 16 ~ 31 are allocated to bank B, DI channels 32 ~ 47 are allocated to bank C, and DI channels 48 ~ 63 are allocated to bank D. The onboard photo couplers provide 3750 Vrms isolation, and act as an interface to field logic signals, eliminate ground-loop problems, and isolate the host computer from damaging voltages. These cards contains has a single DB-37 connector and a single 40-pin male header, each of which contains 32 input channels.The PEX-P64 series also adds a Card ID switch on-board. Users can set Card ID and then recognize the board by the ID via software when using two or more PEX-P64 series cards in one computer.The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications. Accessories

PCI Board/Express/32Ch./12bit/110kS/sThe PEX-1202L is a family of high performance data acquisition board. They feature a continuous A/D acquisition function of up to 110 kHz for low gain under DOS and offer two 12-bit D/A output channels, 16 digital input channels and 16 digital output channels.The PEX-1202L provides 32-channel single-ended or 16-channel differential analog inputs. The PEX-1202L features " MagicScan" function and Continuous Capture function. The PEX-1202L supports PCI Express bus. These cards add new designs of Card ID switch with which users can recognize the board by the ID via software when using two or more PEX-1202L cards in one computer. The pull-high/low jumpers of the card allow user to predefine the DI status instead of floating when the DI channels are unconnected or broken.The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications.  ICP DAS PC-Based Multifunction Board Selection Guide Model Name Bus D/A Channel A/D Channel A/D Sampling Rate FIFO Size Software Trigger (Polling) Pacer Scan (Magicscan) Post-trigger Pre-trigger Middle-trigger Interrupt function   PEX-1202L PCI Express 12-bit, 2-ch 12-bit, 32 S.E/16 Diff 110 kS./s 1 k V V V -   PCI-1202LU Universal PCI PEX-1202H PCI Express 12-bit, 2-ch 12-bit, 32 S.E/16 Diff 44 kS./s 1 k V V V -   PEX-1202HU Universal PCI PCI-1602U Universal PCI 12-bit, 2-ch 16-bit, 32 S.E/16 Diff 100 kS./s 8 k V V V -   PCI-1602FU Universal PCI 12-bit, 2-ch 16-bit, 32 S.E/16 Diff 200 kS./s 8 k V V V -   PCI-1800LU Universal PCI 12-bit, 2-ch 12-bit, 16 S.E/8 Diff 330 kS./ 1 k V V V -   PCI-1800HU Universal PCI 12-bit, 2-ch 12-bit, 16 S.E/8 Diff 44 kS./s 1 k V V V -   PCI-1802LU Universal PCI 12-bit, 2-ch 12-bit, 32 S.E/16 Diff 330 kS./s 8 k V V V -   PCI-1802HU Universal PCI 12-bit, 2-ch 12-bit, 32 S.E/16 Diff 44 kS./s 8 k V V V -   PCI-822LU Universal PCI 16-bit, 2-ch 12-bit, 32 S.E/16 Diff 250 kS./s 8 k V V V V Cost-effective Programmable DIO PCI-826LU Universal PCI 16-bit, 2-ch 16-bit, 32 S.E/16 Diff 250 kS./s 8 k V V V V Cost-effective Programmable DIO  Accessories

PCI Board/Express/Digital/144DI/O/SCSI II/non isolThe PEX-D144LS supports PCI Express bus. These cards provide 144 TTL digital I/O lines that are grouped into eighteen 8-bit bi-directional ports. Each group of three 8-bit ports is arranged on the connector as Port A (PA), Port B (PB) and Port C (PC), respectively, and all ports are configured as inputs Ports on power-up or after a reset.The PEX-D144LS provides a high-density connector that reduces the amount of installation space required for the card in the computer. The PEX-D144LS cards include an onboard Card ID switch that enables the board to be recognized via software if two or more boards are installed in the same computer. The PEX-D144LS also adds pull-high/low jumpers allow the DI status to be predefined instead of remaining floating if the DI channels are disconnected or interrupted.The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications.  Comparison Table Model Interface DI Pull-High/Low Compatibility Advantage PEX-D144LS PCI Express Yes 5 V/CMOS Low power consumption、 Low temperature PIO-D144LU Universal PCI Yes 5 V/CMOS Low power consumption、 Low temperature PIO-D144U Universal PCI No 5 V/TTL High DO Driving  (Output Capability)   Accessories

PCI Board/Express/32Ch./12bit/44kS/sThe PEX-1202H is a family of high performance data acquisition board. They feature a continuous A/D acquisition function of up to 44 kHz for high gain under DOS and offer two 12-bit D/A output channels, 16 digital input channels and 16 digital output channels.The PEX-1202H provides 32-channel single-ended or 16-channel differential analog inputs. The PEX-1202H features " MagicScan" function and Continuous Capture function. The PEX-1202H supports PCI Express bus. These cards add new designs of Card ID switch with which users can recognize the board by the ID via software when using two or more PEX-1202H cards in one computer. The pull-high/low jumpers of the card allow user to predefine the DI status instead of floating when the DI channels are unconnected or broken.The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications.  ICP DAS PC-Based Multifunction Board Selection Guide Model Name Bus D/A Channel A/D Channel A/D Sampling Rate FIFO Size Software Trigger (Polling) Pacer Scan (Magicscan) Post-trigger Pre-trigger Middle-trigger Interrupt function   PEX-1202L PCI Express 12-bit, 2-ch 12-bit, 32 S.E/16 Diff 110 kS./s 1 k V V V -   PCI-1202LU Universal PCI PEX-1202H PCI Express 12-bit, 2-ch 12-bit, 32 S.E/16 Diff 44 kS./s 1 k V V V -   PEX-1202HU Universal PCI PCI-1602U Universal PCI 12-bit, 2-ch 16-bit, 32 S.E/16 Diff 100 kS./s 8 k V V V -   PCI-1602FU Universal PCI 12-bit, 2-ch 16-bit, 32 S.E/16 Diff 200 kS./s 8 k V V V -   PCI-1800LU Universal PCI 12-bit, 2-ch 12-bit, 16 S.E/8 Diff 330 kS./ 1 k V V V -   PCI-1800HU Universal PCI 12-bit, 2-ch 12-bit, 16 S.E/8 Diff 44 kS./s 1 k V V V -   PCI-1802LU Universal PCI 12-bit, 2-ch 12-bit, 32 S.E/16 Diff 330 kS./s 8 k V V V -   PCI-1802HU Universal PCI 12-bit, 2-ch 12-bit, 32 S.E/16 Diff 44 kS./s 8 k V V V -   PCI-822LU Universal PCI 16-bit, 2-ch 12-bit, 32 S.E/16 Diff 250 kS./s 8 k V V V V Cost-effective Programmable DIO PCI-826LU Universal PCI 16-bit, 2-ch 16-bit, 32 S.E/16 Diff 250 kS./s 8 k V V V V Cost-effective Programmable DIO Accessories

PCI Board/Express/Digital/32DI/32DO/isolatedhe PEX-P32C32 supports PCI Express bus. These cards provide 32 channels of optically isolated digital inputs and 32 channels of optically isolated digital outputs, arranged into four isolated banks. Each input channel uses a photo-coupler input which allows either internal isolated power supply or external power selected by jumper. Each digital output offers a Darlington transistor. The power supply of the input port may use the external power or the power from the PC side via DC/DC converter. The power supply of the output port should use the external power. The board eliminates ground-loop problems and isolates the host computer from damaging voltages.The PEX-P32C32 also adds a Card ID switch. Users can set Card ID on a board and recognize the board by the ID via software when using two or more PEX-P32C32 cards in one computer.The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications. Accessories

PCI Board/Express/Digital/8DI/8RO/isol.The PEX-P8R8i is a PCI Express card. Each contain 8 photo coupler digital inputs that provide 3750 Vrms isolation protection, allowing the input signals to be completely floated so as to prevent ground loops. They are also equipped with 8 relay output channels to enable the control of the ON/OFF state of external devices, drive external relays or small power switches, or activate alarms, etc.The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications. Comparsion Model Name PCI-P16R16U PISO-P16R16U PEX-P16R16i PEX-P8R8i Bus Universal PCI Universal PCI PCI Express x1 Relays Form C x 8 Form A x 8 Form C x 4 Form A x 4 Digital Input 16-ch with 5000 Vrms Isolation 16-ch with 3750 Vrms Isolation 8-ch with 3750 Vrms Isolation Card ID - Yes (4-bit) Data bus 16-bit 8-bit Driver UniDAQ SDK/Driver, or PCI-P16R16 SDK/Driver UniDAQ SDK/Driver, or PISO-DIO SDK/Driver Remarks - Suggested for new users.  Accessories

PCI Board/Express/Digital/8DI/8RO/PhotoMos/isol.The PEX-P8POR8i is a PCI Express card. These cards provide 8 optically isolated input channels and 8 PhotoMOS Relay output channels. Both the isolated DI channels and the PhotoMOS Relay channels use a short optical transmission path to transfer an electronic signal between elements of a circuit and keep them electrically isolated. The PEX-P8POR8i card provide 2000 VDC for DI channel isolation protection, allowing the input signals to be completely floated so as to cut down ground loops, block voltage spikes, and isolate the host computer from damaging voltages. PhotoMOS Relays are used where it is necessary to control a circuit using a low-power signal (with complete electrical isolation between the control and controlled circuits), or where several circuits must be controlled by one signal. These cards can be used in various applications, such as controlling the ON/OFF state of external devices, driving external relays or small power switches, activating alarms, contact closure, sensing external voltages or switches, etc. The PEX-P8POR8i card also adds a Card ID switch on-board. Users can set Card ID and then recognizes the board by the ID via software when using two or more cards in one computer. The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications.