I/O Exp. Board /VPD/4AI/2AO/4DI/4DOThe XV310 is a multifunction expansion board that includes 4 analog input channels, 2 analog output channels, 4 digital input channels and 4 digital output channels. It provides a programmable input range on all analog input channels (+/-1 V, +/-2.5 V, +/-5 V, +/-10 V, +/-20 mA, 0 ~ 20 mA or 4 ~ 20 mA), analog output channels are 12- bit at +/-5 V, +/-10 V, 0 ~ 20 mA or 4 ~ 20 mA. Each analog input channel can be configured for an individual range and provides a high overvoltage protection of 120 VDC. Voltage and current inputs/outputs are jumper selectable.
I/O Module/8AI/100kHz/14-bit/JumperThe I-8017H is a 8 differential input Analog Input Module. This 8 differential input channels are provided with 14-bit of resolution and 90 kS/s sampling rate. Each channel can be confi gured to an individual input range of ±10 VDC, ±5 VDC, ±2.5 VDC, ±1.25 VDC or ±20 mA. The modules also provide ±4 kV ESD protection as well as 2500 VDC intra-module isolation. All the three modules can be used to measure voltage and current source. On the I-8017H, an external 125 Ω resistor is needed to measure current source.
I/O Exp. Board/LP-WP-WISE-5000/6 RS-232/non isol.The XW-board series are for uPAC-5000, LP-51xx, and WP-51xx series.One PAC can only plug only one XW-board.XW506 is a 6-port Non-Isolation RS-232 XW-board.
I/O Exp Board/LP-WP-WISE-5000/6AI/1AO/4DI /4DOThe XW-board series are for uPAC-5000, LP-51xx, and WP-51xx series.One PAC can only plug only one XW-board.XW304 is a 6-channel Analog Input, 1-channel Analog Output, 4-channel Digital Output and 4-channel Digital Input XW-board.
I/O Module/16DO/isol/Open-CollectorThe I-8037W provides 16 channels for Digital Output, each of which features Photocouple-isolation. The I-8037W supports Source Type output with short circuit protection and each channel can drive 100 mA load. There are options for confi guring power-on and safe digital output values. ±4 kV ESD protection and 3750 VDC intra-module isolation are also provided to enrich the noise protection ability for industrial environment.
I/O Exp. Board/7AI/1AO/2DI/2DOThe X-board series are for I-7188XA, I-7188XB, I-7188XC, I-7188XG, I-7188EG, I-7188EX and uPAC-7186EX Series (uPAC-7186EX, uPAC-7186PEX, uPAC-7186EG, uPAC-7186EX-FD, uPAC-7186EX-SM).Above one µPAC can plug only one X-board.X305 is a 7-channel Non-Isolation Analog Input and 1-channel Non-Isolation Analog Output and 2-channel Non-Isolation Digital Input and 2-channel Non-Isolation Digital Output X-board for I-7188XB, I-7188XG, I-7188EX, I-7188EG and uPAC-7186EX Series.
I/O Exp. Board/8DOThe X-board series are for I-7188XA, I-7188XB, I-7188XC, I-7188XG, I-7188EG, I-7188EX and uPAC-7186EX Series (uPAC-7186EX, uPAC-7186PEX, uPAC-7186EG, uPAC-7186EX-FD, uPAC-7186EX-SM).Above one µPAC can plug only one X-board.X101 is a 8-channel Non-Isolation Digital Output X-board for I-7188XC.
I/O Module/16DI/isol/16-bit countersThe I-8053W offer 16 channels for Digital Input, catering for both dry and wet contact, with an effective distance for dry contact of up to 500 meters. The I-8053W provides 16 LED indicators that can be used to monitor the DI channel status. 4 kV ESD protection and 3750 VDC intra-module isolation are also provided to enhance noise immunity capabilities in industrial environments.
I/O Module/16DO/non isolated/Open-CollectorThe I-8056W module offers 16 Non-isolated Digital Output channels. The I-8056W supports sink-type Digital Output. The I-8056W includes 16 LED indicators that can be used to monitor the status of the Digital Output channels. 4 kV ESD protection is provided for the Digital Output channels as standard.
I/O Module/8DI/Interrupt ModeThe I-8048W offer 8 channels for digital input, each of which features Photocouple-isolation protection. Either Sink Type or Source Type Input input can be selected via wire connections. All channels have 4 kV ESD protection and 3750 VDC intra-module isolation.
I/O Exp. Board/1AI/1AOThe X-board series are for I-7188XA, I-7188XB, I-7188XC, I-7188XG, I-7188EG, I-7188EX and uPAC-7186EX Series (uPAC-7186EX, uPAC-7186PEX, uPAC-7186EG, uPAC-7186EX-FD, uPAC-7186EX-SM).Above one µPAC can plug only one X-board.X301 is a 1-channel Non-Isolation Analog Input and 1-channel Non-Isolation Analog Output X-board for I-7188XC.
I/O Exp. Board /VPD/4Encoder/8CounterThe XV484 is a 32-bit high-speed Counter/Frequency/Encoder input Expansion Board that offers a variety of mode options, including "Up Counter”, "Frequency Input", "Up/Down Counter", "Direct/Pulse Counter" and "A/B Phase Counter" modes. The mode combinations can be individual set for all 8 channels, where some channels can be set to “Up Counter” mode and other channels can be simultaneously set to “Frequency”, "Up/ Down Counter" or “Encoder input” mode. The built-in digital filter can filter out noise where the high/ low pulse width is smaller than the minimum high/low width of the digital filter.
I/O Module/32DO/isol/Open-CollectorThe I-8041 module offers 32 Digital Output channels, each of which features Photocouple isolation. The I-8041 supports Sink Type Output using an open collector. The I-8041 includes 32 LED indicators that can be used to monitor the status of the Digital Output channels. ±4 kV ESD protection and 3750 VDC intra-module isolation is provided as standard. The I-8041 can be paired with a daughterboard, such as the DN-37-381-A CR for easy wiring, or the DN-8K32R for Relay Output.
I/O Exp. Board/3DI/2DOThe X-board series are for I-7188XA, I-7188XB, I-7188XC, I-7188XG, I-7188EG, I-7188EX and uPAC-7186EX Series (uPAC-7186EX, uPAC-7186PEX, uPAC-7186EG, uPAC-7186EX-FD, uPAC-7186EX-SM).Above one µPAC can plug only one X-board.X106 is a 3-channel Non-Isolation Digital Input or 2-channel Non-Isolation Digital Output X-board for I-7188XC.
I/O Exp. Board/13DOThe X-board series are for I-7188XA, I-7188XB, I-7188XC, I-7188XG, I-7188EG, I-7188EX and uPAC-7186EX Series (uPAC-7186EX, uPAC-7186PEX, uPAC-7186EG, uPAC-7186EX-FD, uPAC-7186EX-SM).Above one µPAC can plug only one X-board.X111 is a 13-channel Non-Isolation Digital Output X-board for I-7188XB, I-7188XG, I-7188EX, I-7188EG and uPAC-7186EX Series.
I/O Module/4AO/16bit/20mAThe I-8024UW is a Source Type Analog Output Modules, off ering 4 single-ended Analog Output channels. Each channel can be programmed to an individual output range of 0 ~ 5 VDC, ±5 VDC, 0 ~ 10 VDC, ±10 VDC, +4 ~ +20 mA or 0 ~ +20 mA. Open wire detection is provided for +4 ~ +20 mA output. Options for configuring power-on and safe values are included, together with qualification for ±4 kV ESD protection as well as 2500 VDC intra- module isolation.
€243.00*
Easy ordering via online shop
Directly from manufacturer
Europe-wide shipping
personal consultation
Delivery time holidays 🎅
Important information about the holidays:
Goods in stock can be ordered until 12 noon on 22.12.23 .
For goods that are not available in stock, an order must be placed by December 5, 2023 to ensure delivery in 2023.
Orders received after 22.12.2023 can be processed and delivered again from week 2 in 2024, depending on availability.
Deliveries in the new year are possible again from 09.01.2024.
For more information please contact us via live-chat or e-mail.
This website uses cookies to ensure the best experience possible. More information...
Request sent successfully
Request wasn't send - a error occured. Please try again.