DAQ Card

PCI Board/Universal/Analog/4AO/14bit/Isol.The PISO-DA series adds high-voltage isolation design that offers a durable ability to keep users' computers safe from unexpected surge. It is the built-in high-quality isolation components that make PISO-DA series featuring 2500 VDC bus-typed isolation!For the PISO-DA series, their voltage output range is from -10 V to +10 V, and their current output range is from 0 to 20 mA. In addition, These cards also feature the following advantages by ICP DAS's innovation:  Accurate and easy-to-use calibration. ICP DAS provides the software calibration instead of the manual calibration so that no jumpers and trim-pots are required anymore. The calibration information can be saved in EEPROM for long-term use. Individual channel configuration.In other words, every channel can be individually configured as voltage output or current output! ICP DAS provides the Card ID function. Users can set card ID for each card and then recognize them one by one when more than two boards are used in a computer.The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications. Accessories

Screw Terminal Board/2x37pin/CA-3710A/m-f/DINFemale DB37 to Screw Terminal Board (Pitch= 5.08 mm) with DIN-rail Mounting (RoHS)Include: CA-3710A (DB37 Male to Female, 90º, 1M)

PCI Board/Express/Digital/16DI/16RO/PhotoMosThe PEX-P16POR16i is a PCI Express card. These cards provide 16 optically isolated input channels and 16 PhotoMOS Relay output channels. Both the isolated DI channels and the PhotoMOS Relay channels use a short optical transmission path to transfer an electronic signal between elements of a circuit and keep them electrically isolated. The PEX-P16POR16i card provide 2000 VDC for DI channel isolation protection, allowing the input signals to be completely floated so as to cut down ground loops, block voltage spikes, and isolate the host computer from damaging voltages. PhotoMOS Relays are used where it is necessary to control a circuit using a low-power signal (with complete electrical isolation between the control and controlled circuits), or where several circuits must be controlled by one signal. These cards can be used in various applications, such as controlling the ON/OFF state of external devices, driving external relays or small power switches, activating alarms, contact closure, sensing external voltages or switches, etc.The PEX-P16POR16i card also adds a Card ID switch on-board. Users can set Card ID and then recognizes the board by the ID via software when using two or more cards in one computer.The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications. Accessories

Daughter Board/16DI/8RO/CA-5015/isol.The DB-16P8R is a 16 channel isolated digital input & 8 channel relay output daughter board for DIO24, DIO48, DIO144, PIO-D144U, PIO-D96U & PIO-D48U OPTO-22 Compatible digital I/O board

PCI Board/Universal/Digital/16DI/16RO/PhotoMosThe PCI-P16POR16U Universal PCI card supports both 5 V and 3.3 V. These cards provide 8 or 16 optically isolated input channels and 16 PhotoMOS Relay output channels. Both the isolated DI channels and the PhotoMOS Relay channels use a short optical transmission path to transfer an electronic signal between elements of a circuit and keep them electrically isolated. The PCI-P16POR16U card provides 5000 Vrms for DI channel isolation protection, allowing the input signals to be completely floated so as to cut down ground loops, block voltage spikes, and isolate the host computer from damaging voltages. PhotoMOS Relays are used where it is necessary to control a circuit using a low-power signal (with complete electrical isolation between the control and controlled circuits), or where several circuits must be controlled by one signal. These cards can be used in various applications, such as controlling the ON/OFF state of external devices, driving external relays or small power switches, activating alarms, contact closure, sensing external voltages or switches, etc.The PCI-P16POR16U card also adds a Card ID switch on-board. Users can set Card ID and then recognizes the board by the ID via software when using two or more cards in one computer.The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications. Accessories

Slot Adapter/PCI/37pin/CA-5002

PCI Board/Universal/Digital/8DI/8RelaisThe PISO-725U universal PCI card supports 3.3 V/5 V PCI bus. These cards contain 8 electromechanical Relay Output channels and 8 isolated or non-isolated Digital Input channels. The DI channels can be set to either isolated or non-isolated via a hardware jumper, and each channel will generate an interrupt signal if the state is changed, which is very useful when monitoring for contact closures/openings as it is not necessary to continuously poll the inputs. The isolated DI channels use a short optical transmission path to transfer an electronic signal between elements of a circuit and keep them electrically isolated. With 3750 Vrms isolation protection, the DI channels allow the input signals to be completely floated so as to prevent ground loops and isolate the host computer from damaging voltages. The Relay Output channels are used where it is necessary to control a circuit using a low-power signal, with complete electrical isolation between the control and controlled circuits, or where several circuits must be controlled by one signal. All relays are de-energized (switched off) during power-on, and support ON/OFF status read back. The PISO-725U can be used in a variety of applications, including contact closure, external voltage sensing, load sensing and I/O control, etc.The PISO-725U also adds a Card ID switch on-board. Users can set Card ID and then recognizes the board by the ID via software when using two or more cards in one computer.The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications. Accessories

Screw Terminal Board/2x9pin/CA-0915/DINtwo Male DB9 to Screw Terminal Board (Pitch= 5.08 mm) with DIN-rail Mounting (RoHS)Includes: CA-0915 x 2 (DB9(Male) to DB9(Female) Cable [RS-232; Pin1-Pin9], 1.5M)

PCI Board/Universal/8DI/8ROThe PCI-P8R8U universal PCI card supports 3.3 V/5 V PCI bus. These cards contain 8 photo-coupler Digital Input channels that provide 5000 Vrms isolation protection, allowing the input signals to be completely floated so as to prevent ground loops. They are also equipped with 8 Relay Output channels that can be used to control the ON/OFF state of external devices, drive external relays or small power switches, or activate alarms, etc.The PCI-P8R8U also adds a Card ID switch on-board. Users can set Card ID and then recognizes the board by the ID via software when using two or more cards in one computer.The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland c++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications. Accessories

PCI Board/Universal/Digital/56DI/OThe PIO-D56U supports 3.3 V/5 V PCI bus. The PIO-D56U consists of three 8-bit bi-direction ports. The 8-bit ports are named as port A (PA), port B (PB) and port C (PC) respectively. All ports are configured as inputs upon power-up or reset. In addition, the PEX-D56 provides additional 16-bit digital inputs and 16-bit digital outputs.The PIO-D56U has a Card ID switch with which users can recognize the board by the ID via software when using two or more PIO-D56U cards in one computer.The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland c++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications. Accessories

PCI Board/Universal/32 ch./12bit/110ks/s/8KThe PCI-1202LU is a family of high performance data acquisition board. They feature a continuous A/D acquisition function of up to 110 kHz for low gain under DOS and offer two 12-bit D/A output channels, 16 digital input channels and 16 digital output channels. The PCI-1202LU provides 32-channel single-ended or 16-channel differential analog inputs. The PCI-1202LU features " MagicScan" function and Continuous Capture function.The PCI-1202LU Universal PCI card supports both 5 V and 3.3 V. These cards add new designs of Card ID switch with which users can recognize the board by the ID via software when using two or more PCI-1202LU cards in one computer. The pull-high/low jumpers of the card allow user to predefine the DI status instead of floating when the DI channels are unconnected or broken.The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications.

PCI Board/Express/Digital/32DI/32DOhe PEX-P32A32 supports PCI Express bus. These cards provide 32 optically-isolated Digital Input channels and 32 optically-isolated Digital Output channels, arranged into four isolated banks. Each Digital Output channel includes a PNP transistor and an integral suppression diode for the inductive load. Isolated input channels 0-15 are allocated to Group A, while channels 16-31 are allocated to Group B. Isolated output channels are allocated to Groups C and D. The photocoupler input for the PISO-P32A32U-5V can be powered by either an internal current source or an external power supply, while the input for the PEX-P32A32 operates using an external power supply only.The PEX-P32A32 also include an onboard Card ID switch that enables the board to be recognized via software if two or more boards in the same computer.The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications. Accessories

PCI Board/Express/Digital/8DI/8RO/isol.The PEX-P8R8i is a PCI Express card. Each contain 8 photo coupler digital inputs that provide 3750 Vrms isolation protection, allowing the input signals to be completely floated so as to prevent ground loops. They are also equipped with 8 relay output channels to enable the control of the ON/OFF state of external devices, drive external relays or small power switches, or activate alarms, etc.The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications. Comparsion Model Name PCI-P16R16U PISO-P16R16U PEX-P16R16i PEX-P8R8i Bus Universal PCI Universal PCI PCI Express x1 Relays Form C x 8 Form A x 8 Form C x 4 Form A x 4 Digital Input 16-ch with 5000 Vrms Isolation 16-ch with 3750 Vrms Isolation 8-ch with 3750 Vrms Isolation Card ID - Yes (4-bit) Data bus 16-bit 8-bit Driver UniDAQ SDK/Driver, or PCI-P16R16 SDK/Driver UniDAQ SDK/Driver, or PISO-DIO SDK/Driver Remarks - Suggested for new users.  Accessories

PCI Board/Express/Digital/64DI/isol./24 VDCThe PEX-P64 series supports PCI Express bus. These cards provide 64 optically isolated digital input (DI) channels that use either an internal or external power supply that can be selected via a jumper. The internal power is provided by an onboard isolated DC/DC converter that provides 3000 VDC isolation and is used for connecting dry-contact input devices. These DI channels are arranged into four isolated banks when using four isolated external power supplies. DI channels 0 ~ 15 are allocated to bank A, DI channels 16 ~ 31 are allocated to bank B, DI channels 32 ~ 47 are allocated to bank C, and DI channels 48 ~ 63 are allocated to bank D. The onboard photo couplers provide 3750 Vrms isolation, and act as an interface to field logic signals, eliminate ground-loop problems, and isolate the host computer from damaging voltages. These cards contains has a single DB-37 connector and a single 40-pin male header, each of which contains 32 input channels.The PEX-P64 series also adds a Card ID switch on-board. Users can set Card ID and then recognize the board by the ID via software when using two or more PEX-P64 series cards in one computer.The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications. Accessories

Relay Board/16RO/20pinThe DB-16R 16 channel Relay Output Board consists of 16 form c relays for efficient switch of load by programmed control. It is connector and functionally compatible with 785 series board but with industrial type terminal block. The DB-16R can be used by A-82x board or any other compatible board The relay are energized by apply 5 volt signal to the appropriate relay channel on the 20-pin flat cable connector . Sixteen enunciator LEDs ,one for each relay , light when their associated relay is activated . To avoid overloading your PC’s power supply ,this board provides a screw terminal for power supply.

PCI Board/Universal/Digital/144DI/OThe PIO-D144LU universal PCI card supports 3.3 V/5 V PCI bus. These cards provide 144 TTL digital I/O lines that are grouped into eighteen 8-bit bi-directional ports. Each group of three 8-bit ports is arranged on the connector as Port A (PA), Port B (PB) and Port C (PC), respectively, and all ports are configured as inputs Ports on power-up or after a reset.The PIO-D144LU provides six connectors for I/O wiring. The PIO-D144LU cards include an onboard Card ID switch that enables the board to be recognized via software if two or more boards are installed in the same computer.The PIO-D144LU also adds pull-high/low jumpers allow the DI status to be predefined instead of remaining floating if the DI channels are disconnected or interrupted.The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland c++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications.  Comparison Table Model Interface DI Pull-High/Low Compatibility Advantage PEX-D144LS PCI Express Yes 5 V/CMOS Low power consumption、 Low temperature PIO-D144LU Universal PCI Yes 5 V/CMOS Low power consumption、 Low temperature PIO-D144U Universal PCI No 5 V/TTL High DO Driving  (Output Capability)   Accessories

Daughter Board/16DI/8RO/CA-5015/DIN/isol.The DB-16P8R is a 16 channel isolated digital input & 8 channel relay output daughter board for DIO24, DIO48, DIO144, PIO-D144U, PIO-D96U & PIO-D48U OPTO-22 Compatible digital I/O board

PCI Board/Universal/32 ch./16bit/100ks/s/DB1825The PCI-1602U is a high performance multifunction card providing high-speed analog I/O and digital I/O functions. The PCI-1602U has a universal PCI interface supporting both 3.3 V and 5 V PCI bus, and it features a continuous, 100 kS/s 16-bit resolution A/D converter, 8 K-sample hardware FIFO, a MagicScan controller (for multi-channel scan), 2-ch 16-bit D/A converter, 16-ch digital input and 16-ch digital output. The PCI-1602U provides either 32-ch single-ended or 16-ch differential analog inputs which are jumper selectable, and a programmable high speed PGA is equipped for gain controls (1, 2, 4 and 8).The PCI-1602U has a Card ID switch for users to recognize the board by the ID via software when using two or more PCI-1602U cards in one computer. The pull-high/pull-low jumpers of the card allow user to predefine the DI status instead of floating when the DI channels are unconnected or broken.The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications.  ICP DAS PC-Based Multifunction Board Selection Guide Model Name D/A Channel A/D Channel A/D Sampling Rate FIFO ize Software Trigger (Polling) Pacer Scan (Magicscan) Post-trigger Pre-trigger Middle-trigger Interrupt function   PCI-1202LU 12-bit, 2-ch 12-bit, 32 S.E/16 Diff 110 kS./s 1 k V V V -   PCI-1202HU 12-bit, 2-ch 12-bit, 32 S.E/16 Diff 44 kS./s 1 k V V V -   PCI-1602U 12-bit, 2-ch 16-bit, 32 S.E/16 Diff 100 kS./s 8 k V V V -   PCI-1602FU 12-bit, 2-ch 16-bit, 32 S.E/16 Diff 200 kS./s 8 k V V V --   PCI-1800LU 12-bit, 2-ch 12-bit, 16 S.E/8 Diff 330 kS./s 1 k V V V -   PCI-1800HU 12-bit, 2-ch 12-bit, 16 S.E/8 Diff 44 kS./s 1 k V V V -   PCI-1802LU 12-bit, 2-ch 12-bit, 32 S.E/16 Diff 330 kS./s 8 k V V V -   PCI-1802HU 12-bit, 2-ch 12-bit, 32 S.E/16 Diff 44 kS./s 8 k V V V -   PCI-822LU 16-bit, 2-ch 12-bit, 32 S.E/16 Diff 250 kS./s 8 k V V V V Cost-effective Programmable DIO PCI-826LU 16-bit, 2-ch 16-bit, 32 S.E/16 Diff 250 kS./s 8 k V V V V Cost-effective Programmable DIO   Accessories

PCI Board/Universal/Digital/32DI/32DO/isol.PISO-P32S32WU has 32 channels of optical-isolated DI and 32 channels of optical-isolated open-collector output board (8-channel for 500 mA and 24-channel for 100 mA current sinking output, NPN), arranged into four isolated banks. Each input channel use a photo-coupler to isolate the card and computer from external signal. Each digital output offers a NPN transistor and integral suppression diode for inductive load. PISO-P32S32WU requires external power to drive the D/I and D/O ports and supports Card ID (jumper) features for multi-board identification and supports both 5 V and 3.3 V PCI slot.This interface board is easily installed in any PC. The board interface to field logic signals, eliminating ground-loop problems and isolating the host computer from damaging voltages. PISO-P32S32WU has one 37-pin D-Sub connector and one 40-pin male header. The 40-pin to DB-37 flat cable is used to fix with the case. The user can connect the digital signal through the second D-Sub connector. Each D-Sub connector contains 16 input channels and 16 output channels.The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications. Accessories

Relay Module/4 Ch./SSR-AC/DINThe DN-SSR4 relay module can control high voltage load up to 4 A @ 240 VAC, while the DN-SSR4-DC can control DC voltage load up to 4 A @ 50 VDC. Four indicator LEDs, one for each relay, light when their associated relay is activated. Each output of DN-SSR4 equipped with a varistor that shunts the surge voltage of the inductive load or electromagnetic brake to protect the relay contact point. All relay control and relay outputs are accessible through the wiring terminals.

PCI Board/Universal/32 ch./12bit/330ks/sThe PCI-1802LU card has a universal PCI interface supporting both 3.3 V and 5 V PCI bus. All the members in the PCI-1800 family have the same architecture; they feature a continuous A/D acquisition function of up to 330 kHz for low gain under DOS and offer two 12-bit D/A output channels, 16 digital input channels and 16 digital output channels. The PCI-1802 series provides 32 single-ended or 16 differential inputs. In addition, an amazing A/D channel scan function called “MagicScan” is provided for users to easily implement multi-channel analog data acquisition applications. The specific MagicScan controller takes out most works of getting A/D value such as selecting channel, setting gain, settling time, triggering ADC and getting data. Even in channel scan mode, it can have different gain code for each channel, and the sampling rate can still reach 330 kS/s totally.The PCI-1802 series cards are equipped with 8 K samples hardware FIFO to reduce data overflow issues under multi-tasking environment like Windows and Linux.The PCI-1802LU has a Card ID switch with which users can recognize the board by the ID via software when using two or more PCI-1802LU cards in one computer. The pull-high/low jumpers of the card allow user to predefine the DI status instead of floating when the DI channels are unconnected or broken.The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications.  ICP DAS PC-Based Multifunction Board Selection Guide Model Name D/A Channel A/D Channel A/D Sampling Rate FIFO ize Software Trigger (Polling) Pacer Scan (Magicscan) Post-trigger Pre-trigger Middle-trigger Interrupt function   PCI-1202LU 12-bit, 2-ch 12-bit, 32 S.E/16 Diff 110 kS./s 1 k V V V -   PCI-1202HU 12-bit, 2-ch 12-bit, 32 S.E/16 Diff 44 kS./s 1 k V V V -   PCI-1602U 12-bit, 2-ch 16-bit, 32 S.E/16 Diff 100 kS./s 8 k V V V -   PCI-1602FU 12-bit, 2-ch 16-bit, 32 S.E/16 Diff 200 kS./s 8 k V V V --   PCI-1800LU 12-bit, 2-ch 12-bit, 16 S.E/8 Diff 330 kS./s 1 k V V V -   PCI-1800HU 12-bit, 2-ch 12-bit, 16 S.E/8 Diff 44 kS./s 1 k V V V -   PCI-1802LU 12-bit, 2-ch 12-bit, 32 S.E/16 Diff 330 kS./s 8 k V V V -   PCI-1802HU 12-bit, 2-ch 12-bit, 32 S.E/16 Diff 44 kS./s 8 k V V V -   PCI-822LU 16-bit, 2-ch 12-bit, 32 S.E/16 Diff 250 kS./s 8 k V V V V Cost-effective Programmable DIO PCI-826LU 16-bit, 2-ch 16-bit, 32 S.E/16 Diff 250 kS./s 8 k V V V V Cost-effective Programmable DIO   Accessories

Screw Terminal Board/2x37pin/CA-3710A/m-fFemale DB37 to Screw Terminal Board (Pitch= 5.08 mm) without DIN-rail Mounting (RoHS) Include: CA-3710A (DB37 Male to Female, 90º, 1M)

PCI Board/Universal/32 ch./12bit/44ks/s/DB-1825The PCI-1802HU card has a universal PCI interface supporting both 3.3 V and 5 V PCI bus. All the members in the PCI-1800 family have the same architecture; they feature a continuous A/D acquisition function of up to 44 kHz for high gain under DOS and offer two 12-bit D/A output channels, 16 digital input channels and 16 digital output channels. The PCI-1802 series provides 32 single-ended or 16 differential inputs. In addition, an amazing A/D channel scan function called “MagicScan” is provided for users to easily implement multi-channel analog data acquisition applications. The specific MagicScan controller takes out most works of getting A/D value such as selecting channel, setting gain, settling time, triggering ADC and getting data. Even in channel scan mode, it can have different gain code for each channel, and the sampling rate can still reach 44 kS/s totally.The PCI-1802 series cards are equipped with 8 K samples hardware FIFO to reduce data overflow issues under multi-tasking environment like Windows and Linux.The PCI-1802HU has a Card ID switch with which users can recognize the board by the ID via software when using two or more PCI-1802HU cards in one computer. The pull-high/low jumpers of the card allow user to predefine the DI status instead of floating when the DI channels are unconnected or broken.The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications.  ICP DAS PC-Based Multifunction Board Selection Guide Model Name D/A Channel A/D Channel A/D Sampling Rate FIFO ize Software Trigger (Polling) Pacer Scan (Magicscan) Post-trigger Pre-trigger Middle-trigger Interrupt function   PCI-1202LU 12-bit, 2-ch 12-bit, 32 S.E/16 Diff 110 kS./s 1 k V V V -   PCI-1202HU 12-bit, 2-ch 12-bit, 32 S.E/16 Diff 44 kS./s 1 k V V V -   PCI-1602U 12-bit, 2-ch 16-bit, 32 S.E/16 Diff 100 kS./s 8 k V V V -   PCI-1602FU 12-bit, 2-ch 16-bit, 32 S.E/16 Diff 200 kS./s 8 k V V V --   PCI-1800LU 12-bit, 2-ch 12-bit, 16 S.E/8 Diff 330 kS./s 1 k V V V -   PCI-1800HU 12-bit, 2-ch 12-bit, 16 S.E/8 Diff 44 kS./s 1 k V V V -   PCI-1802LU 12-bit, 2-ch 12-bit, 32 S.E/16 Diff 330 kS./s 8 k V V V -   PCI-1802HU 12-bit, 2-ch 12-bit, 32 S.E/16 Diff 44 kS./s 8 k V V V -   PCI-822LU 16-bit, 2-ch 12-bit, 32 S.E/16 Diff 250 kS./s 8 k V V V V Cost-effective Programmable DIO PCI-826LU 16-bit, 2-ch 16-bit, 32 S.E/16 Diff 250 kS./s 8 k V V V V Cost-effective Programmable DIO   Accessories

PCI Board/Universal/16 ch./12bit/44ks/sThe PCI-1800HU card has a universal PCI interface supporting both 3.3 V and 5 V PCI bus. All the members in the PCI-1800 family have the same architecture; they feature a continuous A/D acquisition function of up to 44 kHz for high gain under DOS and offer two 12-bit D/A output channels, 16 digital input channels and 16 digital output channels. The PCI-1800 series provides 16 single-ended or 8 differential inputs. In addition, an amazing A/D channel scan function called “MagicScan” is provided for users to easily implement multi-channel analog data acquisition applications. The specific MagicScan controller takes out most works of getting A/D value such as selecting channel, setting gain, settling time, triggering ADC and getting data. Even in channel scan mode, it can have different gain code for each channel, and the sampling rate can still reach 44 kS/s totally.The PCI-1800HU has a Card ID switch with which users can recognize the board by the ID via software when using two or more PCI-1800HU cards in one computer. The pull-high/low jumpers of the card allow user to predefine the DI status instead of floating when the DI channels are unconnected or broken.The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications.  ICP DAS PC-Based Multifunction Board Selection Guide Model Name D/A Channel A/D Channel A/D Sampling Rate FIFO ize Software Trigger (Polling) Pacer Scan (Magicscan) Post-trigger Pre-trigger Middle-trigger Interrupt function   PCI-1202LU 12-bit, 2-ch 12-bit, 32 S.E/16 Diff 110 kS./s 1 k V V V -   PCI-1202HU 12-bit, 2-ch 12-bit, 32 S.E/16 Diff 44 kS./s 1 k V V V -   PCI-1602U 12-bit, 2-ch 16-bit, 32 S.E/16 Diff 100 kS./s 8 k V V V -   PCI-1602FU 12-bit, 2-ch 16-bit, 32 S.E/16 Diff 200 kS./s 8 k V V V --   PCI-1800LU 12-bit, 2-ch 12-bit, 16 S.E/8 Diff 330 kS./s 1 k V V V -   PCI-1800HU 12-bit, 2-ch 12-bit, 16 S.E/8 Diff 44 kS./s 1 k V V V -   PCI-1802LU 12-bit, 2-ch 12-bit, 32 S.E/16 Diff 330 kS./s 8 k V V V -   PCI-1802HU 12-bit, 2-ch 12-bit, 32 S.E/16 Diff 44 kS./s 8 k V V V -   PCI-822LU 16-bit, 2-ch 12-bit, 32 S.E/16 Diff 250 kS./s 8 k V V V V Cost-effective Programmable DIO PCI-826LU 16-bit, 2-ch 16-bit, 32 S.E/16 Diff 250 kS./s 8 k V V V V Cost-effective Programmable DIO   Accessories